- -
601 HP HiTech Mod's
(
http://www.clubcobra.com/forums/all-cobra-talk/131221-601-hp-hitech-mods.html)
| blykins |
07-08-2015 01:43 PM |
How much are you gonna sell them for?
|
| rodneym |
07-08-2015 03:36 PM |
cobakiwi,
P-L-E-A-S-E make this available!!!
And when you do, put me down for 2!
|
| cobrakiwi |
07-08-2015 03:50 PM |
This part is available, Rodney I have you down for two.
Brent PM sent.
Thanks guy's.
|
| cobrakiwi |
03-18-2016 05:13 AM |
1 Attachment(s)
This is a nice project we are working on for the HiTech, front wheel inner fender vents, the goal here is to try and let some of that engine heat out.
|
| rodneym |
03-18-2016 08:32 AM |
If/when mine come out, I'm gonna try something like this.
|
| cobrakiwi |
03-19-2016 05:49 AM |
Quote:
Originally Posted by rodneym
(Post 1384797)
If/when mine come out, I'm gonna try something like this.
|
I should be able to give you some feed back on the effects soon, David is one of those special customers that allows me to run free with the ideas and details, on his car.
He's also great help around the shop, just getting him here is the hard part!!:LOL: |
| HTM101 |
03-19-2016 09:18 AM |
Craig, show 'em a photo of the rear side.
The vent screen has a 1/2" offset toward the foot box. I asked Craig to provide the offset to compensate for the tire rubbing during full turn of the steering, that exists in both fender wells. The gauge of the stainless mesh is stout and I'm certain he had to be a bit fastidious to achieve the nice finished units.
David
|
| cobrakiwi |
03-19-2016 02:57 PM |
1 Attachment(s)
Quote:
Originally Posted by HTM101
(Post 1384930)
Craig, show 'em a photo of the rear side.
The vent screen has a 1/2" offset toward the foot box. I asked Craig to provide the offset to compensate for the tire rubbing during full turn of the steering, that exists in both fender wells. The gauge of the stainless mesh is stout and I'm certain he had to be a bit fastidious to achieve the nice finished units.
David
|
Here you go, engine / header pipe side. |
| All times are GMT -7. The time now is 03:29 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
