Help with air cleaner fit under hood

[Gaz64]

Originally Posted by TNTaylor

Well, I tried the R2C base plate,

http://www.summitracing.com/parts/rcp-ac10615/reviews/

with the 3" filter and it fit PERFECTLY, with at least 1/2" room to spare between the top of air cleaner and hood (remember 427 Street with NO SCOOP.) This is on a Holley 850 HP. I know this is expensive, but unlike the K&N drop bases, it works.

Pix to follow

That's great if that works for your clearance issue, now just get their 14" filter:
14 Inch High Performance Street Air Filters

Originally Posted by mrmustang

Only if he does not use the extreme filter top, which has a 500cfrm flow rate of it's own.

Bill S.

Ah yes, your right Bill, but needing a minimum clearance above the bowl vents, nearly negates the use of such a low height element. Far better off getting a low drop base that flows well, as he already has done.

Originally Posted by TNTaylor

What is the formula that results in "3456"?

TNT

It is a "constant" in the engine airflow formula:

cubic inches to cubic feet= 12 x 12 x 12 =1728

x 2 (induction stroke every second revolution) = 3456

Assuming 100% VE.