|
K&N for Stellings Hellings air filter
Well I was looking for a KN filter for my SH housing and they don't have one to fit.. I thought I saw some of you guys running a K&N..The standard foam is 8.250 outside dia and 6 5/8 ID, 1.5 tall. I could go at least 2" tall
What do you guys suggest for better breathing with this little unit |
Go to page four of this thread for my installation of the KN Xtreme with a larger KN filter below. It's a significant improvement over the original SH that was on there before. Be advised that if you have vacuum secondaries you're going to have to lighten your spring after making this upgrade as the increased volume of air reduces the velocity.
http://www.clubcobra.com/forums/all-...ats-new-4.html |
I like the look of the Stellings Hellings so with a little research found the filter perfect for mine K&N part# NO-0100 it happens to fit a Norton motorcycle. It fits the housing perfectly (without the stainless mess) and more than doubles the height.
|
I run this one: K&N E-2570. I can fit it inside the Stellings mesh screen and you can't really tell.
|
That K&N X-Stream top really makes quite a difference in air flow. BUTTTTTT, if you read the reviews from some of the other forums, there are tons of complaints from guys that say their engines were slower after putting it on. This is because the increased volume of air flow reduces the velocity of the air that is going by the little hole that feeds to the vacuum secondary canister. After putting my new fatter filter and X-Stream top on, my secondaries didn't open at all. Tweaking the vacuum secondary spring or, in my case, installing an adjustable vacuum secondary canister, fixed it right up. The K&N instructions really ought to red flag this for guys that don't have the time, or patience, to think it all through.:cool:
|
Quote:
|
Part numbers and some dimensions are discussed in this thread for the K&N filters that fit the SH air cleaners.
http://www.clubcobra.com/forums/era-...stellings.html |
Thanks for the input guys... I did find this one also
K&N E-1025: High Performance O.E. - Style Replacement Filter 1984-1988 Pontiac Fiero | JEGS |
| All times are GMT -7. The time now is 10:52 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: