|
I’ve never heard anything bad about them. I don’t know much about them though but quite a few people here do I’d bet.
Larry |
You may want to review various posts on the forum, but if you look at he left front behind the tire, there may be a number stamped in the side of the frame. If there is one, that would make your car a Butler. If you see nothing, it is probably an Arntz.
Either way, they are really solid cars. The front end is probably the weak point, but that can be remedied if you want to spend a few bucks. I can get you the name off my rear coilovers tomorrow if your needs to be replaced. |
ok...thanks for your help......
|
turns out its a MGB suspension
|
Call Jagbits they can help
|
| All times are GMT -7. The time now is 10:09 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: