axles

[eschaider]

Originally Posted by Gaz64

I think the op is talking about slop from the wheel to the diff output flange, which is axle cv joint or universal joint slop in this one output driveshaft, not diff internal backlash.

Gary

You're right Gary. I misread the original post. That is not ring gear backlash, that is a broken part somewhere between the drive wheel and the differential side gear. My guess would be a broken axle. Disassembly will tell the story very quickly.


Ed

[Gaz64]

Originally Posted by eschaider

You're right Gary. I misread the original post. That is not ring gear backlash, that is a broken part somewhere between the drive wheel and the differential side gear. My guess would be a broken axle. Disassembly will tell the story very quickly.


Ed

Yes, I know, I had to read the original a few times to get it in my head.

It would good to know how much the other axle has.

Gary

[spdbrake]

Hauss,

The Newer BDR half-shafts could be Backdraft Proprietary. I kinda doubt it though. They look like Audi A3, VW Jetta front half-shafts. But that's "looks".
If you can take one to a large NAPA warehouse and start opening boxes you could possibly find a match.
The Iconic pricing is not too steep honestly for a quality axle though. OEM BMW and Audi factory axles are approx $100-200 more.
Also Iconic (Backdraft) stocks items in a niche market and are not BIG box parts stores like Jegs, Summit, etc... I'd expect them to make some sort of profit on these slow moving items.

You may try The Driveshaft shop also. Their stuff is quality Hi-HP rated. Although Backdraft is not listed on the site they do custom axles as well.
https://www.driveshaftshop.com/kit-car-misc-parts