- -
what radiator?
(
http://www.clubcobra.com/forums/all-cobra-talk/144165-what-radiator.html)
| hauss |
10-26-2020 08:23 AM |
Quote:
Originally Posted by 6TNCRZY
(Post 1484493)
Do you have a underdriven crank pulley? Retarded or over advanced timing can affect engine heat generated along with over concentrated antifreeze.
|
Great question it is a cogged belt I have to assume it is stock diameter as far as timing, went as far as I could go without pinging .cam comes on strong at 3500 to 6500 {limited}. somewhere between 32o and 34o total. |
| cycleguy55 |
10-26-2020 11:47 AM |
Quote:
Originally Posted by hauss
(Post 1484510)
Now you got my head spinning I thought aluminum heads cooled better than cast what am I missing?
|
???
The only reference to cylinder heads refers to SBC heads and specific design issues - as far as I can tell it's not a general reference to aluminum cylinder heads. |
| Thor maine |
10-29-2020 10:14 AM |
I used in my Contemporary Classic a radiator for a big block Chevelle. It was a top/bottom tank and 3 rows thick, brass and I had it recored. Dimensionally it was a perfect fit and never a cooling problem.
|
| Michael C Henry |
10-30-2020 11:06 PM |
My car's original builder did for use in Nevada. it is as wide as possible and is installed from underneath and is covered with four puller fans that completely cover all it's surface. The front nose of the car is all ducted for absolute air flow. It is the heaver old school brass and is low miniatous. I have the original builders records and i never saw anything about buying any radiator. The one improvement now would be new brushless electric fan motors.
|
| hauss |
10-31-2020 08:13 PM |
Still looking just wanted the simple fix was wondering what others are using for their backdrafts? with the 427 motors.
|
| mln385 |
11-01-2020 05:31 PM |
you can also put weather stripping in the front of radiator on the sides so as to keep all the air going through the radiator and not around.
|
| All times are GMT -7. The time now is 02:16 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
