Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Need help with identifying motor mounts - Lone star kit (http://www.clubcobra.com/forums/all-cobra-talk/144357-need-help-identifying-motor-mounts-lone-star-kit.html)

1badmopar 01-02-2021 07:57 PM
Need help with identifying motor mounts - Lone star kit
 
I recently purchased a Lone Star kit Cobra, that was built in the mid 90's and has been stored for the past 10 years of its life. I am in the process of replacing parts to make it road worthy again. I noticed the motor mounts are cracked and I would like to replace them. I cannot identify them. Anyone know what part# or car these are from? They are about 3" square, a rubber pad with steel plate sandwiching them, single stud up and down. Engine is Ford 351W.

Please Help! :confused:

https://live.staticflickr.com/65535/...b4dc888f_w.jpg

https://live.staticflickr.com/65535/...cb8cd34a_z.jpg

https://live.staticflickr.com/65535/...31570cda_z.jpg

spdbrake 01-02-2021 09:57 PM
I see the isolation sandwich plate is sagging a bit. The upper mount looks to be fabricated.
You may want to go to a kit type as they are adjustable like this one.
https://www.hedman.com/product-detail/4562

joyridin' 01-03-2021 06:26 AM
I can tell you they are from a Chrysler product, but not exactly which one. They used them for many years. This link is for a 1979 Dodge D150 pick-up truck.

https://www.rockauto.com/en/moreinfo...nMSyQs6MbIWUJy

1badmopar 01-03-2021 07:41 AM
Thanks for the information. The Chrysler's do look close. I will start digging.

joyridin' 01-03-2021 10:41 AM
Quote:
Originally Posted by 1badmopar (Post 1487300)
Thanks for the information. The Chrysler's do look close. I will start digging.
You might go back further. I remember seeing them on early 70's Dodge/Plymouth also.

1badmopar 01-03-2021 11:45 AM
After following your lead, I was able to find some 1978 Ram charger mounts that look very similar. Part# 2265. Looks like AutoZone has them in stock, so I am going to go pick one up and take some measurements.

RUFdriver 01-03-2021 02:40 PM
You might try contacting UCC, they bought the assets from LSC after they went out of business, maybe they can help. Those Mopar mounts look pretty close.

1badmopar 01-05-2021 04:06 PM
Ok, after visiting with Dennis at UCC, he informed me that it is part 2266. Looks like I was one part number off with my earlier guess.

Glad to have this information! Now off to fix the car!


All times are GMT -7. The time now is 05:25 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: