Need help with identifying motor mounts - Lone star kit

[1badmopar]

I recently purchased a Lone Star kit Cobra, that was built in the mid 90's and has been stored for the past 10 years of its life. I am in the process of replacing parts to make it road worthy again. I noticed the motor mounts are cracked and I would like to replace them. I cannot identify them. Anyone know what part# or car these are from? They are about 3" square, a rubber pad with steel plate sandwiching them, single stud up and down. Engine is Ford 351W.

Please Help!

[spdbrake]

I see the isolation sandwich plate is sagging a bit. The upper mount looks to be fabricated.
You may want to go to a kit type as they are adjustable like this one.
https://www.hedman.com/product-detail/4562

[joyridin']

I can tell you they are from a Chrysler product, but not exactly which one. They used them for many years. This link is for a 1979 Dodge D150 pick-up truck.

https://www.rockauto.com/en/moreinfo...nMSyQs6MbIWUJy

[1badmopar]

Thanks for the information. The Chrysler's do look close. I will start digging.

[joyridin']

Originally Posted by 1badmopar

Thanks for the information. The Chrysler's do look close. I will start digging.

You might go back further. I remember seeing them on early 70's Dodge/Plymouth also.

[1badmopar]

After following your lead, I was able to find some 1978 Ram charger mounts that look very similar. Part# 2265. Looks like AutoZone has them in stock, so I am going to go pick one up and take some measurements.

[RUFdriver]

You might try contacting UCC, they bought the assets from LSC after they went out of business, maybe they can help. Those Mopar mounts look pretty close.

[1badmopar]

Ok, after visiting with Dennis at UCC, he informed me that it is part 2266. Looks like I was one part number off with my earlier guess.

Glad to have this information! Now off to fix the car!