This site is quieter than a high school reunion!

[tonywyso]

Originally Posted by spdbrake

I love the 14lb flywheel currently installed. Revs quick, and decels quick. I have accidently taken off in 3rd a couple of times so torque does not seem affected.

I changed from my solid roller 3000-8000rpm to a hyd roller 1500-6500 and it a lot more torquey. No more low rpm trailer hitching.

Was going to go with a McLeod https://www.summitracing.com/parts/mcl-6913-07 but their stuff never comes balanced.

So then put a Ram https://www.summitracing.com/parts/ram-50-2259 in the cart. But after looking at pricing for the flywheel insert, grinding and match balancing I'm going with a Ram https://www.summitracing.com/parts/ram-75-2259

My 408W is internally balanced but Ram does sell external balanced kits as well.

Standard throwout bearing, and fork. Adjustable pivot ball. I have a Lakewood bellhousing and external hyd slave setup.

I'm looking at "Quick Time" they have light weight dual and triple setups. This will be my winter ptoject.