Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Where do I buy a Ford 9 inch center section rear, new (http://www.clubcobra.com/forums/all-cobra-talk/38116-where-do-i-buy-ford-9-inch-center-section-rear-new.html)

rsimoes 01-24-2003 08:33 PM

Where do I buy a Ford 9 inch center section rear, new
 
Where do I buy a Ford 9 inch center section rear, new.

I'll be using a Tremec TKO II (475 ft-pounds torque capacity) and I would like to buy a new rear. I'm thinking 3.33 or 3.50 gears.

Any recommendations?

Thanks!

Junket 01-24-2003 09:11 PM

rsimoes Summit or Jeg's both have carrier and related parts I would go to the salvage yard and get a carrier and order the relaten parts from one of the venders and take it to a reliable shop have them mag. the carrier and put it togather

mrmustang 01-25-2003 03:34 AM

Http://www.brucesspeed.com
973-664-0192 (closed today, until 2/3/03 for vacation)


He is a full service shop that can custom make or set up your rear end. You'll need to know what specs you want (axle lengths, tube ends,C-clip eliminator etc) before buying/ordering........He is a master WD for Winters, 9+, and currie.................


Bill S.

speed220mph 01-25-2003 07:20 AM

If you're not in a hurry, go to Lowe's Motor Speedway in April to the Auto Fair. You can find just about anything for a Cobra, plus any other car, there . . . even a complete new Cobra. But there is about any set up for a 9-inch Ford you can imagine, from nodular center sections with lockers to bread-and-butter open assemblies in any gear ratio you desire ready to plug in. Most of these diffs are "newly rebuilt".

southernfriedcj 01-25-2003 07:29 AM

www.ring-pinion.com

My .411 w/ Detroit locker was $805. to my door(Atlanta).

speed220mph 01-25-2003 07:38 AM

Everthing you ever wanted to know and more about nine-inch Fords can be found on: http://hometown.aol.com/asimmsjr/viet14.htm

By the way, I got my nine-inch Traction Loc for $275 at the Charlotte Auto Fair. It's a good idea to have a wagon or golf cart for toting out such a heavy piece.

Back in Black 01-25-2003 08:26 AM

Make mine
 
Strange Engineering. Expensive, but many recent national drag records have been made with this type/brand of rear end...mine is the Street Pro posi 3.00 with 33 spline Street Pro axles.

You can get SE from www.jegs.com

rsimoes 01-25-2003 04:48 PM

Does the detroit locker click on turns?


All times are GMT -7. The time now is 11:39 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: