|
Looking for a 289
Does anyone out there know where I can find a 289. I'm getting ready to build a GT40 and I would like to put a 289 in it for corectness. Actually, I'd like two (2) as I'm thinking of building two cars. The first for resale, and the second as a keeper. I've been checking quite a few junk yards here in central Ohio, but older stuff is hard to come by. I suppose I could go with 302, but I'd like it to be pre-1972. Oh yea, to title a GT40 in Ohio, I was wondering if it can be titled as a '66-'69. Or do you have to go by engine year. I want to avoid the whole emissions thing.
Jim Downard |
289 engines >>>>>>>>>>
Jim you can find them at my place!%/ If you really want to be correct i have a few 5 bolt 289s .
C5AE 289 w/ mexican main caps same as Hipo.. 1 set of C3OE 289 Hipo heads correct for early cobra. **) And a pile of 289 small chamber heads most w/ C5/C6 casting #.. Mike/Map351 Same Old Stuff >>>>>>>> |
Map......
...do you have a set of Hi-Po main caps or mexican caps for sale? I have a block but need the caps.
Please email me if you do. Thanks, Rick:confused: |
289 engine
Hi Jim,
I have a 289 engine with a block casting of D1 for sale. It is posted on this site. Look in the parts for sale and search for 289 engine. It has lots of goodies on it. If you can't find it my email is j_nassef@hotmail.com. Thanx, Joeypaul |
Ford stopped making 289s in late 1967. With a casting date of D1 you have a 302/5.0.%/
Mark IV I'll look to see if i have a spare set on main caps .**) Mike/Map351 More Junk >>>>>> |
I know it's a 302 block but I used a 289 Crank.
|
| All times are GMT -7. The time now is 01:46 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: