|
So what are the dimensions for the first emblem? Was it big or small, any sizes?
Emblem S1CS-A or the first (54?) cars. Cheers Migge |
Hmm, If I remember my friends 260 (#53) AC had no badges. Except the side badges "powered by ford". I'm not suprised, that there were serval different adaptations in the beginning. **)
|
When my car was painted I had the painter put the AC emblem on in gold leaf.
http://www.kentuckycobraclub.com/members/detail/914 |
Not really my answers :-(
|
My choice was made after looking at as many pictures of orginal AC Cobras as needed to get that look.Only ones I compromised on were front fender badges instead of 427 mine have 460.
|
Dimensions PLEASE!!!!
|
Man, you are so demanding of an old thread!
These are reproductions, but: 1 15/16" http://img.photobucket.com/albums/v6...d/7637987b.jpg 2 5/16" http://img.photobucket.com/albums/v6...d/e98a4e82.jpg |
Thanks a lot, but I mean the OLD FIRST logo "SHELBY AC COBRA" or known as S1CS-4, page 3 in the thread.
|
Quote:
|
No dimensions of the "Old Shelby AC Cobra" , emblem nr. S1CS-A availabel?
Rico |
2 Attachment(s)
From calculations and relations boot handle, number plate lamp etc. it must be 78 mm, a little over 3", so I guess 3" is correct. I have an answer from Dave and he said 74 mm wide, so just under 3". I 'll find out end of this month in SPA, where I can take some mesurements. Hope to see CSX 2049 or 2051 again.
|
1 Attachment(s)
It is exac. 74 mm wide, pic is not very correct because of the angle.
|
2 Attachment(s)
If anyone wants the AC badges I had them made a few years ago, I have four left and I would sell them for $60 each unfinished. In order to finish you need to use touch up paint and the clear coat. Some sanding will also be required. I have showed what they looked like once done. The ones I have are rough aluminum.
csx7034 at g mail dot com Thanks, Allan I have the units on CNC with the supplier so if there was a number of guys who wanted them they still could be made. |
Not bad but also not very original made, sorry.
|
| All times are GMT -7. The time now is 07:03 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: