|
Hello blykins,
Clamp your vice grips on whats left of the stud. Make sure the teeth of your vice grips are in good, clean condition. Next carefully apply heat, with a propane or mapp gas torch, to as much of the exposed area around the stud that you can get at. Keep applying heat while gently trying to rotate stud counter clockwise. When the area around the stud (stud boss) heats up enough, the stud should start to loosen. Carefully back it out by rotating stud back and forth. Apply heat as needed until the stud is out . Good Luck. |
Did you get the stud out yet? What kind of oil are you using? Try PB blaster it does wonders. If you are still fighting it let me know. I do this kind of thing for a living and may be able to help.
|
| All times are GMT -7. The time now is 08:45 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: