Black (Leather/Vinyl??) Fender Guards...

Snak Iyz · #1 (**permalink**) 01-19-2004, 09:15 PM

I have seen these on a number of different Cobra makes, but I have not been able to find them after numerous web searches.

These are the ones that seem to strap/snap on the inside of the vehicle and then run down the fender and have one or two snaps under the fender well.

Any help in pointing me in the direction of where to buy these or have these made would be appreciated. They will be going on a BDR car.

Also, any feedback on how these are in the long run vs. Invinca shield would be helpful. Is it personal preference or are there other reasons?

Thanks

- Snak Iyz

Snak Iyz · #2 (**permalink**) 01-26-2004, 11:24 AM

Thought I would bring this back to see if anyone has some feedback.

thanks!

ST · #3 (**permalink**) 01-26-2004, 11:34 AM

Give Roy a call, I know they've made some for the Shelby 4000 cars.
However, I don't know whether or not they'll fit your particular car.
http://www.finishlinecobraslv.com/

rdorman · #4 (**permalink**) 01-26-2004, 12:07 PM

The ones that I have looked at where made to fit. Very easy really. Leather or vinyl sewn to a non-abrasive fabric on the inside. Attach to a lift-a-dot on the top (one for your top or toneau cover. you could put one further down in the interior if you have neither) and usually velcro in place inside the fender well.
Rick