|
stripes
This may be a dumb question but here goes; what is the proper width of the stripes on the Cobra roadster, UNIQUE manual calls for 7 1/2 at the narrow point
(nose and trunk bottom) expanded to 9 in at the cowl and behind the seats, this is for each side with a 1 in gap between. The ERA manual says 6in at the nose to 7 1/2 at the cowl and behind the seats to 6 1/4 below the trunk also with a 1 in gap. Which is closer to original, not that it really matters. |
Use This Link
allthingscobra.tripod.com/authentic_touches.html
While I cannot absolutely attest to accuracy, they have been a very good source of information regarding Cobras for me in the past. Bob |
| All times are GMT -7. The time now is 08:06 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: