07-13-2007, 11:53 AM
|
|
CC Member
|
|
|
Join Date: Mar 2007
Location: Alpena,
Mi
Cobra Make, Engine: Scratch building frame,FFR Mkll body ,302w, and T5 trans, 3.0 rear.
Posts: 416
|
|
Not Ranked
stripes
This may be a dumb question but here goes; what is the proper width of the stripes on the Cobra roadster, UNIQUE manual calls for 7 1/2 at the narrow point
(nose and trunk bottom) expanded to 9 in at the cowl and behind the seats, this is for each side with a 1 in gap between. The ERA manual says 6in at the nose to 7 1/2 at the cowl and behind the seats to 6 1/4 below the trunk also with a 1 in gap. Which is closer to original, not that it really matters.
__________________
1963 Mercury Monterey 460+ .060 .//Cobra clone, Scratch build frame /302/ T-5 WC / 3.00-9in/FFR mkll body (Broken but repairable) /91 Lincoln Wire Wheels // : N.S.M.C Charter/Life Member// Die Hard Blue Oval Nut
The finish is better than the beginning. Ecc7:8
|