Learning about clutch set-ups. Need a little help

[Tallguy]

Originally Posted by RodgerH

Hey Mark,

I measured an extra fork I have, p/n DOTZ-7515B, which is what I used on my FE/Lakewood/TKO600. I don't know what is different from the D0TZ-7515A.

Pivot to throwout bearing centerline= 3-7/8"
Pivot to slave rod push point= 6-5/8"

Hope this helps!

Rodger (also an engineer - but retired as of yesterday! )

First off, congratulations on your retirement! Must be a great feeling today.

Thanks so much for the fork dimensions; this is exactly what I was looking for. There is more leverage than I thought. What clutch and pressure plate did you use, and are you happy with them?

mark