Fel Pro Intake Gaskets

Snakebit · #1 (**permalink**) 01-30-2008, 07:42 PM

Any one try the Fel Pro 1262S intake gaskets for a 302 Ford? They have a metal core. I've read a lot of posts saying the Fel Pro gaskets fail. The Victor Renz are a tad too small. Intake port measures 1.24 x 2.02

ERA-FIA · #2 (**permalink**) 01-31-2008, 07:44 AM

Yes, they are the only ones that seem to work, I applied mine with Edlebrock Gaskacinch(sp) and retorqued them a number of times untill they take a good set.

blykins · #3 (**permalink**) 01-31-2008, 08:42 AM

I just assembled a Windsor stroker. I used SCE gaskets. They just use plain gasket material. No beads to fail. They were cheap too and they were made to fit the huge ports on the TFS TW-R heads.

FWB · #4 (**permalink**) 01-31-2008, 08:58 AM

the best results i've achieved is to use the victors, high tack them to the head and cut the ports larger with a razor blade to conform to the ports, then use aviation seal or perma. #2 for the intake.

FWB · #5 (**permalink**) 01-31-2008, 09:38 AM

by the way, HEY JOE HOWS THAT TROPHY!!!!!!

ERA-FIA · #6 (**permalink**) 01-31-2008, 10:30 AM

Hi Bernie, it's waiting for its twin so I have book ends. We are waiting for a date for all Ford day will you be joining us?

FWB · #7 (**permalink**) 02-01-2008, 07:38 PM

Quote:

Originally Posted by ERA-FIA

Hi Bernie, it's waiting for its twin so I have book ends. We are waiting for a date for all Ford day will you be joining us?

no joe its fred...the guy in the picture, bernie gave the car up. i'm the cars sugar daddy now whens the all ford day i wanna sign up. i'm sure bernie will come. i'll tell him he has everybody's email anyway. i must say that i wont let you walk into another trophy, you'll have to beat the beast too.