|
Jag rear end / stud question
I want to replace the lug nut studs with longer one on a Jag rear end. Can I press them out and press new ones in?
Dwight |
No. Standard XJ studs are threaded into the hub and then peened over on the inside. You have to grind the peen off to unscrew them. I forget the thread offhand...
|
Dwight,
I needed studs a bit longer than the stock length ones and found these: http://www.jagbits.com/mm5/merchant....yMechanical_50 or here: http://www.importpartsspec.com/cart/show/item/235445 They're also about 1/2 the price of the stock ones. You might want to verify with the vendor that they are truly 1/4" (or more) longer than stock before you order them. CWI: http://www.cwiinc.com/index.html put them in for me Hope this helps, Tom |
Thanks
Thanks Tom just what I was looking for.
Dwight |
| All times are GMT -7. The time now is 11:57 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: