Jag rear end / stud question

[Dwight]

I want to replace the lug nut studs with longer one on a Jag rear end. Can I press them out and press new ones in?

Dwight

[strictlypersonl]

No. Standard XJ studs are threaded into the hub and then peened over on the inside. You have to grind the peen off to unscrew them. I forget the thread offhand...

[Tom Wells]

Dwight,

I needed studs a bit longer than the stock length ones and found these: http://www.jagbits.com/mm5/merchant....yMechanical_50
or here: http://www.importpartsspec.com/cart/show/item/235445


They're also about 1/2 the price of the stock ones. You might want to verify with the vendor that they are truly 1/4" (or more) longer than stock before you order them.

CWI: http://www.cwiinc.com/index.html put them in for me

Hope this helps,

Tom

[Dwight]

Thanks Tom just what I was looking for.

Dwight