Powerjection 1 System (Boss EFI) by Retrotek

Skip J. · #1 (**permalink**) 10-25-2008, 09:57 AM

Does anybody have any personal experience with the Powerjection 1 System (Boss EFI) by Retrotek Speed Products? There were some older posts in 2007 but none indicated actual use of the product. Appreciate any and all feedback.

Thanks

Skip

Velox · #2 (**permalink**) 10-25-2008, 11:36 AM

there are several threads on ffcobra.com on these, search bossefi they should show up. Some have had problems, others have things sorted out apparently

ENTDOC · #3 (**permalink**) 10-25-2008, 02:58 PM

I just returned from picking up a motor at T&L in North Carolina and noticed he had several BOSS units on engines. He says they are very easy to tune but you sometimes run into issues with really high HP motors(700hp). He was very enthusiastic about the system and advised it for anyone looking for EFI wanting a retro look. He also loves the Retrotec weber look setup

jdean · #4 (**permalink**) 10-25-2008, 03:15 PM

I have the Powerjection, and plan to use it on my T&L 418. Powerjection sell both the "carb look" throttle body and the traditional port injection type. They have seen no difference in power between the two.

Skip J. · #5 (**permalink**) 10-26-2008, 11:00 AM

Thanks for your feedback guys. I believe Santa Claus will be giving me one of these for Christmas!

Skip

yamazee · #6 (**permalink**) 04-08-2009, 01:41 PM

Skip, just curious if you ever went with the Retrotek set up and what you thought of it. I was considering getting it for my BDR, with a Boss 302.