|
Shock spacers
You might find, as I did, that the preset height will change when you are complete with assy. with motor installed. My car looked like a 4-wheel drive. I had to bring it down front and back. The shock set up looks like it has changed a little since a got my kit in 09.
|
I am wondering about the brake pads that came with the 11" brakes from A&C. On the front they are the GM single piston calipers. They are pretty simple. My only question has to do with the brake pads. The inner brake pad has a clip on the back that fits into the piston. The outer pad fits into the caliper OK but there is no retaining clip. There's nothing to attach the outer pad to the front caliper?
|
Pads
They ride on the pins that screw into the caliper and then into the mounting bracket.
Jon |
I posted a couple of pictures in my gallery. The outer pads don't have a tab that touches the caliper pins. They seem to fit otherwise but no ears on the pads like the inner pads to go over the pins.
|
Hey a quick progress update on my A&C. I have my chassis done and drivetrain bolted on. I used my frame as an engine test stand and fired up the engine for the first time. I went with a GM HEI module to go along with my Duraspark distributor (thanks Roger!). That was really straightforward. I used a cheap gauge set to measure temperature and oil pressure. I used an ignition wiring harness from Quickcar that was a cinch to connect. Along with some friends we set the timing and after some sputtering got a reasonable idle going. I can now button it up. I will be ordering wheels soon and going to Buffalo this summer to pick up the body.
http://www.clubcobra.com/photopost/d...SC03206_2_.jpg |
looks good
Nice job you ran your brake lines the same way I did, looks clean and straight. I'm a bit further along than you, I had hoped to have it done by now. Ran into a bunch of problems plus I work a ton 7 day weeks so I work on the car when I can in the evenings.
Dave |
I am having lots of fun hanging my doors on my A&C cobra (=sarcasm). Can someone tell me what the final distance between the cowl bar and firewall ended up being?
Also how do the hinges on the passenger and drivers differ? I am starting to wonder if they were mis-marked. Thanks in advance. |
Well my A&C build is "done"---I have been street legal now for all of about two weeks and I have about 200 miles on the odometer so far. So far the shake out cruises have been great and I just had the front end realigned and it is tracking much better. I am looking at a few dwindling days of good weather ahead in Pennsylvania so I hope to make the best of it!
In retrospect, the build was great. It took about 20 months to complete from delivery to getting PA license plates/registration. My son who was 9 when I started is now 11 and enjoying being my co-pilot on our weekend cruises. There were some challenges along the way but I am happy where I ended up. It will be a process of continuous refinement I can see! I just replaced my seat cushions with memory foam which lowered my seating position by about 3 inches (= much better). I have a long list of planned winter projects on the car. It was great to get help from so many forum members and use these archives to identify solutions to problems. Here are a couple of pictures...http://www.clubcobra.com/photopost/d...0/DSC08099.jpg http://www.clubcobra.com/photopost/d...0/DSC08096.jpg |
Looks Great!
Maybe we will get a few more warm days here and there. |
What color did you go with? Is it zat blue from the website?
|
It is not "zat blue." I wanted a darker blue--more of a royal blue. The color is ultramarine blue (RAL 5002- Color Gel Coat RAL 5002 Ultramarine Blue in stock | Fibre Glast). Joe matched it very well.
|
| All times are GMT -7. The time now is 11:26 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: