| cwilson |
07-02-2007 10:10 AM |
Gelcoat/fiberglass cracks
I was curious if anyone has had any problems with cracks developing in your A&C gelcoat? I've only had my car on the road since October 2006 and it has less than 1800 miles on it. However, this morning I noticed 3 large cracks, about 2" each at the corners of the hood opening toward the nose of the car. I haven't called A&C yet, I just wanted to see what other have experienced first.
|
| leslie.files |
07-02-2007 11:45 AM |
Sometimes Stress' are in certain area's of the car body from assembly. Overtightening of bolts, slight misalignment, extreme temp changes, as well as many other things can lead to cracks. Ask any vette owner! Check with a quality body shop and you might need to shim parts to get rid of the stress on the body. A quality body shop can also repair those cracks. Good luck,
|
| Roscoe |
07-02-2007 12:17 PM |
I've had my car on the road for 8 years and never had a crack. Like the above post says, stress put on the body via misalignment, etc. can cause a stress crack.
|
| PNJSNAK |
07-02-2007 02:14 PM |
I have some cracks that appeared near where I made the side pipe cut out. I put in what I thought were generous radius in the corners. I noticed these cracks coming from one of the corners while washing it. I did run over something that was thrown up into the wheel well near the bottom of the body.
I asked Joe about it and he said they could have come from that if the hit was big enough, because it looks like the bottom of the body flared fender area is what might have flexed.
You have to get real close to see them and they have not grown any.
Joe said if I had any of the resin left he gave me, he could gring out the crack and fill it with the resin.
|
| melliott |
01-21-2009 07:17 PM |
I have an a&c bought 2 months ago with 400 miles on it was flawless. drove 300 miles developed cracs around windshield posts hood corners at rear louvers, and around roll bar. I checked clearances don't find anything hitting. I did find no rubber between frame rails and body. I wondered if this could be problem. I want to fix problem before recoating or painting. I also wondered about adding fiberglass stiffening under body in areas where cracks developing to add stiffness. Any help or suggestions appreciated
|
| eddytheb |
01-23-2009 06:57 PM |
First question have you opened the hood and let it rest on the nose to keep it open. Also do you have good support for the nose of the car and did you force the nose up a little when mounting it. I have a few of Joe's cobras under my belt and I have seen cracks during the build from moving the body around wrong but nothing big at all after the car has been finished.
The cracks around the windshield holes is very had to imagine, only thing that comes to mind is the windshield posts are putting pressure or rubbing the body. The posts should float inside the holes never should it hit on the front or back edges of the holes. Shimming the windshield posts is a real important thing to be carful of the wrong pressure on the windshield will cause it to brake.
Stop by and see what we are working on @ www.eddytheb.com |
| All times are GMT -7. The time now is 05:33 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
