Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Antique & Collectibles (http://www.clubcobra.com/forums/antique-collectibles/)
-   -   edelbrock carb (http://www.clubcobra.com/forums/antique-collectibles/92426-edelbrock-carb.html)

rdc767 10-19-2008 01:30 AM

edelbrock carb
 
Got the cobra fired up Wednesday. I bought a used Holly and I couldn't get it to work. Went down to pep boys and picked up a Edelbrock Carb. Fired right up and runs very nice. I can't get over how loud it is. There must not be much in the side pipes to deaden the noise. Just have a few things left to do. Lay some carpet and cover the dash, bumpers and windshield wings. Any body have a source for heat shield for the side pipes?

http://www.clubcobra.com/photopost/d...eldebrock1.JPG

http://www.clubcobra.com/photopost/d...eldebrock2.JPG

http://www.clubcobra.com/photopost/d...eldebrock3.JPG

ZOERA-SC7XX 10-19-2008 05:29 AM

I made my heat shields. I took a 5" dia. x 24" long piece of truck exhaust pipe and Cut it in half lengthwise, deburred the edges and used truck heat shield mounting brackets (2 per side) and painted them flat black. Very functional and inexpensive. Any truck parts store can supply these items.
See my latest gallery pic and you'll see the sidepipes installed.

saltshaker 10-19-2008 05:43 AM

I did a post on "stainless steel sidepipes" and one of the responses had a site for stainless heat sheilds!

wtm442 10-19-2008 05:48 AM

Real Cobra drivers don't need no stinkin' heat shields ...

http://performanceunlimited.com/cobr...s/burnkit.html

Roscoe 10-19-2008 08:28 AM

You just have to practice getting in and out gracefully.

Roscoe

wtm442 10-19-2008 09:05 AM

http://www.stainless-specialties.com/

http://www.actoncustom.com/

http://www.clubcobra.com/forums/all-cobra-talk/87179-snake-bite-prevention.html

http://www.clubcobra.com/forums/shop-talk/85035-exhaust-heatshields.html

http://www.clubcobra.com/forums/all-cobra-talk/65221-sidepipe-burn.html

http://www.finishlineaccessories.com...e5dc924954573a

Don 10-19-2008 09:43 AM

Heat Shields, Finish Line, Club Cobra advertiser:

http://www.finishlineaccessories.com...c5f714076d8fab


All times are GMT -7. The time now is 09:36 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: