|
corvette pedal box
does the corvette box from A&C come with a brake lite switch? if not what did you use?
Jon |
Jon;
Not sure what you mean by "Corvette" box from A & C. In the pedal box that Pete Clark (Fast Times Rods) made for me he put a Corvette Master cylinder on it for me. If you get the Ron Francis or American Auto Wire Wiring harness it comes with a brake switch you plum in the brake line coming out of the master cylinder. Very easy, very clean. If you are thinking of a switch that the foot brake pedal comes in contact with when depressed. Can't help you, sounds too complicated. JIm |
Jon, yes the corvette pedal box from A&C does come with the brake light switch that is activated by the brake pedal arm
|
I used a brake pressure switch. This one
http://www.speedwaymotors.com/Pressu...itch,1971.html Very easy to use. Little brake pressure closes the switch. I ran it on the front brake line. Get the brass tee to hook it up. Ron |
I used an inline pressure switch, really cool. If my memory is correct it was purchased through Pegasus?
|
it leaks
i bought the in line brake switch and installed it....it leaks! What can I use to seal the threads?
Jon |
Yellow thread sealer from Lowes. It says gas and oil resistant. Comes in a tube. Let it dry before using it.
Ron |
Most hydraulic brake light switches are made with an NPT flare and should not leak when torqued correctly. If it is in tight, I would say make sure that whatever you used to 't' the line has the proper female flare first. You may have a mismatch of some sort! :eek:
|
| All times are GMT -7. The time now is 02:25 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: