- -
Kit Car Week End
(
http://www.clubcobra.com/forums/arizona-cobras/100465-kit-car-week-end.html)
| DWRAT |
10-27-2009 10:30 PM |
SandyC
You are the camera king.
Thanks for doing such a great job.
Dan
|
| Bob Broberg SPF667 460BB |
10-27-2009 11:26 PM |
Dan, ratboy, I saw your cam lobe. You smoked it! Lunati cam too! Don't worry, Jeff is Master of all things Motor and will build you one better!
AZ Bob
|
| mikiec |
10-28-2009 11:35 AM |
Dan,
I think it is time for you to stuff a big block in there. :):)
So you wiped out a cam lobe? Jeff will fixit for you.
Mike
|
| DWRAT |
10-28-2009 11:43 AM |
I didn't have anything to do with the cam failure from what I am told other then putting in the best oil that money could buy ( Mobil 1 full syn ).
Yes it is in good hands at Jeff's and will soon be back on the road.
Dan
|
| mikiec |
10-28-2009 12:09 PM |
You were driving, the cam went south... Nuff said. :):)
Mike
P.S. I added more pics.
|
| John-Tucson |
10-28-2009 08:57 PM |
DWRAT, Why are you using "the best oil that money can buy" ? That old 10W30 or 20W50 at $2.50 a quart works fine.
|
| DWRAT |
10-28-2009 09:31 PM |
Quote:
Originally Posted by John-Tucson
(Post 996630)
DWRAT, Why are you using "the best oil that money can buy" ? That old 10W30 or 20W50 at $2.50 a quart works fine.
|
I figured it would protect the motor but I was wrong again. |
| Cobrafann |
10-28-2009 10:08 PM |
Anyone know if the little dog in the orange Cobra was there?
|
| John-Tucson |
10-28-2009 10:12 PM |
There was no poop in the parking lot pertaning to puckering puppies.
|
| DWRAT |
10-28-2009 10:57 PM |
|
| mikiec |
10-29-2009 09:51 AM |
I guess that's what the donkey thinks about Listers.. :):):)
Mike
|
| Karl Bebout |
10-29-2009 10:20 AM |
I'd think that donkey is lucky to still be alive. Good thing he didn't hoist a leg to take a squirt.
|
| Robert McLinden |
10-29-2009 11:37 AM |
DWRAT,
Remember if you are running a flat tappet cam you need lots of Zinc and Phosphate. Mobil 1 doesn't have the right amount. Ok for roller cams.
|
| Car Nut |
10-29-2009 04:45 PM |
So the yellow car couldn't do a burnout because it had a bad cam?
Hmmm.
|
| DWRAT |
10-29-2009 05:17 PM |
Quote:
Originally Posted by Robert McLinden
(Post 996767)
DWRAT,
Remember if you are running a flat tappet cam you need lots of Zinc and Phosphate. Mobil 1 doesn't have the right amount. Ok for roller cams.
|
Bob,
Thanks for the info, that is what Jeff said also.:confused:
Dan |
| DWRAT |
10-29-2009 05:18 PM |
Quote:
Originally Posted by Car Nut
(Post 996836)
So the yellow car couldn't do a burnout because it had a bad cam?
Hmmm.
|
No,the yellow couldn't do a burn out because he's a wimp:LOL:.(Sorry Don) |
| Robert McLinden |
10-29-2009 05:45 PM |
DWRAT,
You are either going to have to run an additive (ZDDP is one) or us one of the few oils that still has the proper amount of Zinc/Phosphate. I run Brad Penn semi syn, it has the proper amount of additive plus a really strange green color. Some of the Valvoline Racing Oils have the right amount (not all the weights) check the internet. Comp Cams has a good writeup on what is needed.
|
| davids |
10-29-2009 06:06 PM |
That donkey sure liked Steve's ride!!!! Dave
|
| davids |
10-29-2009 06:08 PM |
Steve, make up a new license plate...... !!!! Tinkler !!!!
|
| Danr55 |
10-29-2009 07:00 PM |
MOA is my preferred additive.
|
| All times are GMT -7. The time now is 01:29 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
