Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Arizona Cobra's (http://www.clubcobra.com/forums/arizona-cobras/)
-   -   Firebird Tonight 09/21/12 (http://www.clubcobra.com/forums/arizona-cobras/117385-firebird-tonight-09-21-12-a.html)

ItBites 09-21-2012 11:25 AM

Firebird Tonight 09/21/12
 
Just thought I'd put it out there that I'm going out to Firebird drags tonight with my Cobra and the wife's '10 Challenger. We're just gonna have some fun, nothing serious.

If anyone is looking for something to do, come on by and make a few passes.

Karl Bebout 09-21-2012 02:16 PM

E. hope you get your beast into the 10s again. F'Bird is sometimes pretty stingy with the track prep. See you tomorrow?

ItBites 09-21-2012 02:59 PM

Yeah Karl, I don't expect earth shattering times. Firebird doesn't do a lot of track prep and my tires are three or four years old... I really just need a place to hit WOT in second and third to do some EFI datalogging and tuning. Plus the wife wants to run her Challenger ;)

And yes, see you tomorrow. I have a date with the Mesa dump in the morning, then I'll call you.

dave from mesa 09-21-2012 03:10 PM

Karl
You taking the car? Shouldn't overheat in a 1/4 mile.:LOL:

ItBites 09-26-2012 09:57 AM

Well,

I ended up not going... Sorry for the false advertising, but when I got home on Friday night and went to pull the Cobra into the shop while I loaded the trailer, I found a big puddle of oil on the floor.

Long story short, I had dragged a small hole in the oil pan. Fortunately had only lost maybe a quart, so I didn't hurt the engine, but now I have to remove the pan and weld it up.

In my car I normally have to remove the engine to get the pan off. In the past few years, this would make the second time pulling the engine to remove the pan, so I am going to cut the cross-member out of the frame and either make it a bolt-in, or re-route the cross member a couple inches forward in a C-shape and weld it back in. Either route is less work than pulling the engine and this way, I can pull the pan in the future anytime I need to... Its always something!


All times are GMT -7. The time now is 04:51 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: