Club Cobra
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   Arntz/Butler Forum (http://www.clubcobra.com/forums/arntz-butler-forum/)
-   -   Side Curtains for Butler Cobra with Hard-Top (http://www.clubcobra.com/forums/arntz-butler-forum/99010-side-curtains-butler-cobra-hard-top.html)

lal Naja 03-27-2013 04:48 PM
Greg, I have some photos here on the forum in my profile/album and a bunch more on my face book page. The link is below.

https://www.facebook.com/media/set/?...1&l=4a4838b30a

Arthur

my427cobra 03-27-2013 05:01 PM
Here's a page from XK's Unlimited catalogue showing the XKE hardtop seals.

http://www.clubcobra.com/photopost/d...mbs/img085.jpg

I'll check them out tommorrow.

Cheers
Greg

lal Naja 03-27-2013 08:20 PM
Quote:
Originally Posted by my427cobra (Post 1237465)
Here's a page from XK's Unlimited catalogue showing the XKE hardtop seals.

http://www.clubcobra.com/photopost/d...mbs/img085.jpg

I'll check them out tommorrow.

Cheers
Greg
The rubber extrusion shown here is very similar to what Butler supplied with my glass and hard-top.

For the seam between the hard-top and body I'm planning on using two strips of 'D' profile hollow rubber bulb seals. 1/4" x 1/8" section. The strips will be spaced about 1/2" apart and held in place with pressure sensitive adhesive.

The bottom lip seal shown in the image above will not function too well on my top.

Cheers back, Arthur


All times are GMT -7. The time now is 05:10 PM.
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: