Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Cobra Painting (http://www.clubcobra.com/forums/australian-cobra-club/100151-cobra-painting.html)

SJZ302 10-07-2009 08:38 PM

Cobra Painting
 
Hi All

You have probably heard this all before but i need some advice. I live in Melbourne and am looking to get my cobra painted.
So far i have had a few quotes that have been so cheap that you never hear from the guy again, or so expensive that I would have to sell the house and live in a tent next to my cobra.
If you know of any good painters that have had experience in painting these cars, I would appreciate it. As i said the car is based in Melbourne.

Merv and Sharon 10-07-2009 08:44 PM

There was an earlier thread on this that may help: http://www.clubcobra.com/forums/show...light=Painting

Cheers,

Merv

sambo 10-07-2009 09:20 PM

SJZ302, the guys in the Cobra Car Club of Victoria will be able to point you in the right direction.

http://www.cobracarclubvic.org.au/ContactsUs.html

Alternatively contact Marty Govert at Kenmer Engineering in Noble Park. His painter has a few Cobras under his belt and they won't stuff you around. 9701 6037.

By the way, welcome to the forum! Care to tell us a bit about your car?

Sambo

Zedn 10-07-2009 10:09 PM

You could also give Doug Pearce a call (03) 9739 4222. He builds a lot of Cobra and can probably point you in the direction of a good painter if he doesnt do it himself (pretty sure he has a booth there).

AC302 10-08-2009 04:39 AM

I picked my car up from Doug's 3 weeks ago after a full re-paint and am currently putting it back togeather, what a job!!!!
I am very happy with the work done, and he must do a good job often as his factory is always full of half painted, half built cars of all types and someone's pride and joy.
As well as all that Doug is not a bad bloke who usually has cold cans in the fridge.:LOL::D**) VERY IMPORTAINT

OZCOBRA 10-08-2009 05:06 AM

Look forward to seeing the pic's???!!!......Certainly chose well ,we all know of Doug's great prep work and Dave's painting skills and as you said a Cold Beer!!!!

stiffy 10-08-2009 07:08 PM

I Agree
 
SJZ302,


I agree Doug and his team do a great job.

Fiberglass is a different animal to metal and its needs experience in this field.


STIFFY

Rebel1 10-08-2009 07:11 PM

Fortunately in Brissy we have a couple of excellent experienced painters.

For those looking for a good one on the Northside should PM me for the contact info.


All times are GMT -7. The time now is 05:02 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: