|
HELP!!! accelerator cable (what's it off?)
I snapped my cable at the nationals last year and did a patch-up to get it home.
Time to replace it; problem is I can't remember what car it came from. All the local auto shops don't keep shelf stock and weren’t very helpful. The cable is about 1.5 metres long. The carby end fits over a small 5-6mm nipple with a clip over the top to secure it, it has a double screw adjustment bar and I Think it use to have a flexible rubber outer cover to keep the dust out. It has a threaded rod that goes through the fire wall with a nut either side. The peddle is out of a HQ Holden and has a hole for the end of the cable to come through and a little green clip that stops the ball on the end of the cable coming back through the hole. |
You can get a cable from Lokar.
http://www.lokar.com/interior_pages/tc_kd.htm Pegasus racing http://www.pegasusautoracing.com/keywordsearch.asp You said it has a threaded rod on it some maybe it is a CSR Zero Friction? http://www.csr-performance.com/shop/...ment.da/cables |
You can probably make your own inner wire cable and re-use your old outer. I made a new one for mine when I switched from the LS1 manifold to the 4 Barrel manifold. Check out your local bicycle shop, they sell the inner cable in various guages usually with one end swaged. You can often re-use your old cable ends.
Cheers |
I used Flexdrive to make my cable up. They're in Adelaide (08 82689433) but their head office is either in Melbourne or Sydney. They've got every part imaginable to make cables up but I remember they don't do braided. Good luck!
Regards. |
I went with a standard XF Falcon cable for mine.
|
Same as mine
|
| All times are GMT -7. The time now is 12:09 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: