Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Dash Pad for QLD Compliance (http://www.clubcobra.com/forums/australian-cobra-club/105132-dash-pad-qld-compliance.html)

byroncobra 06-18-2010 06:08 PM
Dash Pad for QLD Compliance
 
Fellas

Can anyone who's had Ray Cross engineer their car tell me what's the minimum acceptable for the dash crash pad?

It seems to be the case in all the pics posted here that digital cameras can't reproduce them;)

Thanks
Greg

Outwest34au 06-18-2010 06:12 PM
I know of one guy with a harrison kit that had Ray and used the blue foam camping matress material and then covered it with vinyl. It ended up about 20-25 mm thick. I am not sure if this was the correct thing to do but it passed. There is a spec somewhere regarding the density of the foam required. If you need to speak with him PM me and I will dig up a phone number.

Merv and Sharon 06-18-2010 06:22 PM
Greg I used Warwick's fiberglass piece with thick foam and black vinly covering. I can lend it to u if u can't get one

byroncobra 06-18-2010 06:57 PM
Thanks Fellas

Merv, the borrowing option sounds good thanks! One less job to muck about with. Depending on how long the trimmer has my car, I may need it in a month or so (I hope)

Given the 3 hour drive between us, if you're heading south let me know and maybe i can sort a drop off in Bris or GC

Merv and Sharon 06-18-2010 08:51 PM
Will do Greg. I will be down for a short trip to Bris next Monday morning and could leave it in the city but I might be easier to post it if you're not coming up?

byroncobra 06-18-2010 10:13 PM
Merv
I've PM'd you
Thanks

WKB 06-19-2010 12:41 AM
I don't know if this will help. The check list that I recieved from Ray states "CRASH PAD FITTED TO DASH – PADDED HI-DENSITY FOAM."

Warren

Merv and Sharon 06-19-2010 01:00 AM
Ray liked mine! PM back Greg.

victor 06-19-2010 01:37 AM
Quote:
Originally Posted by WKB (Post 1059401)
I don't know if this will help. The check list that I recieved from Ray states "CRASH PAD FITTED TO DASH – PADDED HI-DENSITY FOAM."

Warren
Any dangerous or sharp projections must be removed. These include edges that are exposed as a result of cutting and removal of body sections. All edges that vehicle occupants may contact must have a radius of not less than 5mm and a minimum thickness of 5mm of high density energy absorbing foam or similar material bonded to the surface and suitably trimmed.
Hope this helps...Found in Regs:)


All times are GMT -7. The time now is 09:04 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: