|
Failed Oil Cooler?
Has anyone ever heard of the Oil Cooler located in the front of the body under the "Oval' opening failing? I would be interested in some input here.
I have utilised the Oil Cooler that most builders utilise for the engine, but in my car this Oil Cooler provides cooling for my 6L80E 6 speed Tiptronic Transmission. My concern here is:- Would my transmission be cranking out more pressure to the Oil Cooler than the Oil Pump on an LS2 6 litre GM engine which could in fact cause the Oil Cooler to fail? Baz |
Not sure about the oil pressures involved with an auto transmission but engine oil pressures can be up to 70psi. Combine that with cold sluggish oil and you can blow one apart.
With an engine oil thermostat setup it's good to put a one way check valve in the return line from the cooler. That way the thick cold oil under high pressure cant get pushed back towards the cooler. from the engine while the thermostat is shut. Cheers |
I use an earls cooler up front for the trans cooler on mine too Baz, I have a stall converter fitted to my 4L65e that produces more heat than a standard trans and have had no cooling issues even on track days and 40+C days.
Pressure wise I don't know what they are capable of, yours should be no different to mine. |
Quote:
I'm asking this because last Tuesday, I blew my Oil Cooler to smitherines. Dropped about 4 litres of transmission oil over 100 metres and you should have seen the white smoke from the oil on the exhausts out the back. I thought my dream car was going up in smoke. The new Oil Cooler had only done a little over 1,000 ks and the transmission was running at normal operating temperatures when the Cooler let go. Maybe it was just a lemon of an Oil Cooler. The tow home cost me $200. That's why I am trying to find out if anyone else has has a similar problem. I was running an 11 row Derale Oil Cooler at the time. Baz |
Hi Baz
Where did it fail? Phil |
Had an engine oil cooler on a rally car crack once. We redesigned the mounting to provide more compliance and no more dramas. A real low pressure oil light came in handy that night.
Cheers |
Most of the time an automatic transmission cooler line will not have the same pressures as elsewhere in the transmission. Many areas of the transmission have very little or no pressure ie: the sump which is where most cooler lines return to. I would say that you had a defective cooler. Earl's has been around a long time. It's not likely a faulty design.
|
Quote:
Baz |
You don't have a blockage do you Baz?
What size lines are you using? |
oil cooler
I have a mocal oil cooler that I am going to fit in either the engine pressure side or the scavenge side of my oil system, and use a Canton thermostat so the cold oil pressure wave at startup goes into the block and not destroy the oil cooler.
|
G'day Baz,
Probably telling you how to suck eggs but these coolers must be mounted top and bottom. They can blow apart and if the pressure don't get them the vibration eventually will. |
Quote:
Baz |
prediction
Hey Baz,
If I had to guess, the fittings into the cooler were overtightened and this weakened/ cracked the unit, then a bit of vibration, heat and pressure then the weakness failed. Phil |
Quote:
Baz |
Transmission Oil coolers are used in many OEM towing applications, go look at a few new vehicles and compare to what you are using and how they are plumbed.
If you are using a conventional oil cooler, be sure to mount it so the body is sandwiched and not located by the bottom or top end plates alone, Earls has in their catalog some examples of how to mount them, vibration will definately shorten their life dramatically. |
Quote:
|
i had an oil cooler on the front shoot craps, started leaking, luckily it was not pressurized oil into the engine but scavenge oil, don't know why, never did find out.
Quote:
|
Quote:
Baz |
That is line pressure Baz, not cooler pressure.
Line pressure is the operational pressure inside the box operating clutches ect. |
Quote:
I know that there is a **** load of pressure created within the box. The first time I drove it, we failed to remove a yellow plastic plug from around the transmission breather pipe which is located on the upper rear portion of the box. After a few kilometres, the plug blew out with such force, that it dislodged the metal cradle which holds my sound system in place by around 6cms. The air release was similar to a truck dropping its air brakes. Baz |
| All times are GMT -7. The time now is 11:57 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: