Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Jag front hubs (http://www.clubcobra.com/forums/australian-cobra-club/111673-jag-front-hubs.html)

Tenrocca 07-13-2011 09:15 PM

Jag front hubs
 
Guys, is the front hub the same between the earlier S2 (smaller stub axle) and Later S3\S3 (larger stub axle) - just running different ID bearings?

Cheers

Gav 07-13-2011 11:13 PM

No one is game to make a comment Andrew, just in case you take exception to their wheels, engine , paint colour, religious belief ect ;)

Tenrocca 07-13-2011 11:22 PM

Thanks for your input Gav, but if you could stick to MY thread topic that would be great. Feel free to create a new thread about my dislike of the colour "Bunnings Green".

Background - Ive discovered I have the smaller stub axles on the front and want to go thicker - not sure if I also need to replace the hub or just the upright\axles\bearings.

Thanks in advance for any USEFUL input. :)

Gav 07-13-2011 11:35 PM

Your past partners have made comment about your smaller stub too.

Aussie Mike 07-13-2011 11:42 PM

Don't buy anything from this bloke on eBay. He looks really dodgy

eBay Feedback Profile for alisher71

boxhead 07-13-2011 11:47 PM

Holy crap, and I though Mr Tucker was dodgy.

Aussie Mike 07-13-2011 11:50 PM

Quote:

Originally Posted by Gav (Post 1140141)
Your past partners have made comment about your smaller stub too.

Not talking from experience there are you Gav? Didn't you share a room with him at the nationals one year? :p

Tenrocca 07-13-2011 11:56 PM

Quote:

Originally Posted by Gav (Post 1140141)
Your past partners have made comment about your smaller stub too.

Mods - can you ban this guy? Sick of the personal attacks.

Gav 07-14-2011 12:33 AM

No it was Pneall that was disappointed with both his performance on the track and at the motel.

Mando 07-14-2011 01:10 AM

Gavin, that can't be right, Pneall told me on the last night of the nationals he found a way of making his 8" long.
He later told me he did it by folding it in half. :eek:

Regards.

Gav 07-14-2011 01:28 AM

Phil isn't the one with performance issues Mando.
He managed to find Andy's cars rev limiter regularly!

Gav 07-14-2011 01:30 AM

Have you tried Jagdaim or Catscrappers Andrew?

Philm 07-14-2011 01:45 AM

I think the gold stubs are the ones you need.

Zedn 07-14-2011 01:52 AM

Give these guys a call.

Jaguar Spare Parts Supplier - Jag Prestige Spares- H/H Prestige Spares - Australia's Largest Independant - Used Land Rover Discovery Spare Parts

I have found them to be very helpful and they will get the parts to you in Sydney within a couple of days. Great service. Just give them a call and explain the application, they deal with lots of cobra and hotrod customers.

Tenrocca 07-14-2011 07:19 AM

Thankyou Liam for your constructive input.

I have called them and they were great but I think their main guy (the one with the brains) is on hols - the other fellas there reckoned I needed new hubs too, but I can see a separate part number anywhere, so Im not sure they are right. Even if someone wth a set of bearings for the thicker axle can measure the OD and I can compare to the OD on the ones I have?

Thought someone here would know, but I should have known better that all I would get would be smart arse comments about penis\stub size and gold rims. Pathetic. Just grow up you lot. :)

Cheers,
Andrew

Philm 07-14-2011 07:50 AM

Feeling a little cold Andrew.

Tenrocca 07-14-2011 08:19 AM

Not at all Phil. Toasty here. :)

Anyway - Google is a better friend then you all. Found it. XJ6/12/XJS Hub is same from 69-87, part number CBC1867.

Zedn 07-14-2011 04:53 PM

Quote:

Originally Posted by Tenrocca (Post 1140221)
Not at all Phil. Toasty here. :)

Anyway - Google is a better friend then you all. Found it. XJ6/12/XJS Hub is same from 69-87, part number CBC1867.

I have series 3. If you need any measurements let me know.

Aussie Mike 07-14-2011 04:54 PM

I have a spare pair of S3 front hubs if you need them Andrew.

Cheers

Mando 07-14-2011 07:25 PM

Tenrocca, why are you after shorter stub axles? Does this have anything to do with increasing outer dish on the front rims?

Regards.


All times are GMT -7. The time now is 06:28 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: