Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   GoPro Camera Mounting? (http://www.clubcobra.com/forums/australian-cobra-club/117997-gopro-camera-mounting.html)

gjkrv8 11-17-2012 04:42 PM

GoPro Camera Mounting?
 
Hi Everyone,

My son just came back from oseas and bought me a new GoPro Hero 3 Silver Edition camera.

Looks the businesss. Even has a iPhone App.

Just wondering what each of you use for mounting on the Roll bar (I am assuming).

It comes with stick on flat and curved mounting pads but dont want to put anything permanent on the Cobra.

Thanks

rgds

Gregg

hsv300 11-17-2012 05:01 PM

Hi Gregg I bought the roll bar mount that GoPro sell works ok.

cheers Greg

BAsque1 11-17-2012 05:32 PM

G'day Greg:
I have the black edition of the Hero3, the suction cup work fairly nice on the dash and inside the front windshield. I have a WCC Cobra and the roll bar has an OD of 3" If I want to place it on top of the roll bar I will need to rig a permanent clamp that opens to that diameter.
Cheers
Lou

gjkrv8 11-17-2012 06:07 PM

Quote:

Originally Posted by hsv300 (Post 1219325)
Hi Gregg I bought the roll bar mount that GoPro sell works ok.

cheers Greg

Thanks Greg.

Did you buy it local? or online etc?

Rgds Gregg

hsv300 11-17-2012 08:43 PM

Gregg got it online eBay.

gjkrv8 11-17-2012 10:38 PM

thanks Greg

DaveW 11-18-2012 12:43 AM

Gregg,
I'll bring my sons with me on sat, he has all the mounts and you can try before you buy so to speak.

Dave

Don 11-18-2012 07:38 AM

Another source for camera mounts, I/O Port Racing Supplies:

IO Port Racing Supplies: I/O Port Products

Varmit 11-18-2012 07:57 AM

Quote:

Originally Posted by BAsque1 (Post 1219329)
G'day Greg:
I have the black edition of the Hero3, the suction cup work fairly nice on the dash and inside the front windshield. I have a WCC Cobra and the roll bar has an OD of 3" If I want to place it on top of the roll bar I will need to rig a permanent clamp that opens to that diameter.
Cheers
Lou


Same here. Found when I mount it on the roll bar, gets some wind noise, but the suction cup on the dash, clear sound with out any wind, good view. You will have to experiment with it to see what works best for you

From the dash:http://www.youtube.com/watch?v=rD_K--EpZ0Y

From the roll bar area: http://www.youtube.com/watch?v=cer6Mqt_1bo
Got the Black Edition a couple of days ago, with the LED screen option on the back. Think it will be an excellent set up to get vids.

Roush #1 11-18-2012 09:22 AM

The IO Port model from I/O Port Products works well for me.
A little pricey, but well made. No problems after nearly 5 years.

DaveW 11-18-2012 12:54 PM

For the wind noise problem, you can get a plug in mic. it plugs straight in to the speaker plug and has a silencer on it, they work very effective.
It has no leads and just sits snug with the body,
You need to use the case with the cut outs in it, not the waterproof case.

Heres a link to an example on eBay, its not the one we have, but will give you an idea

http://www.ebay.com.au/itm/GoPro-Mic...item3f1e585ccc

p.s. its amazing what you hear when the wind noise is gone.
regards
Dave

Tim Brewer 11-18-2012 03:34 PM

I use the suction cup and stick it in the center of the car, next to the roll bar.

gjkrv8 11-18-2012 10:12 PM

Thanks Guys, Regarding suction cup method, I dont believe that passes scruitineering when we race over here?

cheers

gregg

BJ's Snake 11-18-2012 10:49 PM

Its fine as long as you cable tie to something in case it does come unstuck. I use the suction cup and have not had any issues at all.
Cheers
BJ

gjkrv8 11-19-2012 02:30 AM

Quote:

Originally Posted by BJ's Snake (Post 1219507)
Its fine as long as you cable tie to something in case it does come unstuck. I use the suction cup and have not had any issues at all.
Cheers
BJ

Thanks BJ

MFE III 11-19-2012 10:27 AM

I used the rollbar mount for my GoPro. I also just bought this mike set up on fleabay
http://http://www.ebay.com/itm/STERE...item3f038a6f75
what's nice about this setup is that it has separate right and left channel mikes so I can run one down on the outside of each seat to pick up left and right sidepipe sound and no wind noise.

sambo 11-19-2012 03:34 PM

MFE, I've been recording audio on a separate unit but it's a pain to re-sync with the GoPro video on my PC. That binaural mic setup looks pretty good. Are you getting any distortion or clipping when recording from inside the Cobra? The pre-amp on the GoPro is pretty noisy from what I've been reading.

d488y2 11-20-2012 11:06 PM

Has anyone tried one of these?
VideoToGO Dwn items - Get great deals on items on eBay Stores!

twobjshelbys 11-21-2012 07:47 AM

I used the GoPro roll bar mount and it worked great.


All times are GMT -7. The time now is 04:01 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: