|
Quote:
I use Nathan for suspension repairs and alignments on my customer's vehicles. Great to work with, efficient and very reasonably priced. He will also likely be fabricating the undercar exhaust for my Pace too. |
Thanks guys, have been trying to ring him but the phone rings out.
Have sent an email to his sales email contact and await a call. Cheers |
Further progress
Achieved closure on a number of items over the past week
Received my custom spark plug leads from Ice Ignition having worked out the carrier method and then measuring up using the plug ends available. Used billet loom carriers attached by the rocker cover bolts. I increased the leads from the standard 8mm to 9mm which has made them snug in the billet carriers. http://i564.photobucket.com/albums/s...psl46l4ewc.jpg http://i564.photobucket.com/albums/s...psfhyezpko.jpg I also realised I hadn't fitted up the necessary rear reflectors and worked up a means by attaching into the rear nudge bar mounting bolts. The photo also shows the raised position of the reversing lights now protected by the fuel tank. In the right back ground is the modified amp lead cover I am just finishing off as well. http://i564.photobucket.com/albums/s...psfsrg9nqu.jpg And after a bit of polishing in the engine bay to clean up dulled bright work, I finally mounted up the engine plate I'd had polished and which had been missing off the motor and in storage all those years. Perhaps some day hence I'll need to get this plate modified to include the letters "SC" - Supercharged. That would be nice! http://i564.photobucket.com/albums/s...psb2w6deyn.jpg So that nicely finishes off the engine look. The last bits of work will still be in the boot until Friday when I get the trailer and load the car up for a Saturday delivery to the trimmer. Cheers |
thats coming along great and looks more complete with every new post . cant wait to see it when it comes back from the trimmers /
cheers dean |
http://i564.photobucket.com/albums/s...psfsrg9nqu.jpg
Hope that's not the seat cover material behind the car Slowy :eek: Cheers |
Yes it is BJ just like Boxy's frilly lace efforts!!
|
Awesome looking engine, how did you achieve that shine????/
|
Aus
I have a polishing man I use and whom does a great job. Visited him with the windscreen and he was smart enough to know not to polish the chrome off the brass. He had done the plenum, that centre plate and the gas tank cap previously too. However I pulled out my purple polish to revisit the plenum shine that had dulled since it had been first polished. This stuff is just great and can be used on most metals. The trick I suspect will be keeping the sucker shiny with use - lol |
Looking great Slowy. you must be getting very excited. I have loved watching your updates over the past year, it gives me hope.
|
It is time!
So to the tune "The Wizard of Oz" I hum to the photo below....
'Off to see the trimmer' Deliver the car first thing tomorrow morning. Many thanks to Marty's trailer services - lol http://i564.photobucket.com/albums/s...pseg0nf0xd.jpg Am hoping it should only be two or three weeks and the cabin and seats will be fully trimmed. Will be visiting Advantage suspension for an alignment and am fortunate that Marty's RWC fellow will look the car over for that piece of paperwork. Will be pushing all and sundry as I've booked a Vicroads inspection appointment for registration on 14 December!! Cheers |
Looking great slowly, Frankston or Moorabbin for trimming?
|
Jon
The car is going to Blackmans in Moorabbin. Cheers |
Safely installed for next phase
A quiet drive yesterday morning and unloaded the car into the trimmer's shop.
http://i564.photobucket.com/albums/s...psujcquths.jpg Had a good chat with Peter's brother as the first to arrive as he'd owner a cobra about a decade ago. Had a look at the hide and carpet for the job and still pleased with the colour selection. Now I can't wait for it to be finished. Many thanks to Marty's trailer services for the loan of the Kenmer transporting special. Enjoy |
How's the car going Slowy? Is the trim done any photos?
|
Ben
Sadly Peter overstated his staff's availability, as I should have realised for this time of year. I was at the shop early last week and have to admit there was a huge dent in the number of cars that had been in his shop. Peter did indicate then that he was hoping to tackle my car this week coming. I'll keep you posted. If the interior is finished prior to Christmas I will be purchasing an unregistered vehicle permit so that I can do some testing. Here's hoping for this at least. |
A Christmas present........
Seems I may have been more nice than naughty this year.
Santa (aka Peter Blackman) rang this morning to indicate that he expects to have the cabin and seats completed by next Monday. The cheese and kisses and I will toddle in to Peter's factory tomorrow to test fit the seat foam to make sure there is adequate support. All being good I'll need to work up a Vicroads unregistered vehicle permit to allow me to drive the car home - woo hoo! I was meant to have visited Vicroads on Monday just passed for re-registration. With the previously delays identified some time back, I pushed that inspection date back to Monday 25 January 2016. This will ensure I have ample time to get a roadworthy and other work done for this Vicroads visit date. Now I am excited!! Interior photos will follow in due course. Cheers |
Way to go. What a good xmas pressie and from what I see on the weather chart, I nice time to be in the shed in Melbourne.
Take and post photos tomorrow, and hope all goes as planned. |
A quick update though no photos.
Cabin carpeted with just edge finish to be done. Seat backs done but a little more lower back padding will be added. Very traditionally looking pleated style. Most importantly Peter had two styles of seat base foams prepared. He had been planning on using the thicker one. After repeated seating tests between the missus and I the thinner variant will be used to get a nice height position in the car. Didn't see the door trims but they had been done too with pockets. The colour combo is spot on so we are very happy. Car will be finished Monday so planning on collecting it Tuesday arvo once I've finished my last audit for the year. Getting excited now!! |
Real happy for you slowy.
Best wishes and I hope she serves you well with many miles and smiles. Congrats. |
Sounds great Slowy.
Will be good to see the "Yellow and Black" on the road. Cheers Gregg |
| All times are GMT -7. The time now is 04:09 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: