06-09-2015, 05:38 AM
|
|
CC Member
|
|
|
Join Date: Dec 2014
Posts: 365
|
|
Not Ranked
After several months of clutch, bell housing, master cylinder and CSS preload issues I am picking up where I left off in Jan... (2015..!!).
Engine and gearbox back in, new gearbox mount fabricated, moving the holes 15mm forward to stop the lower half of the bracket hitting the back of the gearbox casing (cudos to the 'professional' I commissioned to set these things up correctly, this was the last thing he touched and the last one requiring rework to make it actually correct..!).
Fitted an e-stopp park brake controller this evening, welded a small bracket to the transmission tunnel with the cables due in the next day or so..  .
Need to figure out why I was modifying the AC duct a few months back..! then run the electrical looms and refit the dash panels.
Cheers
Chris |
100Likes
Threaded Mode
