|
Come on, let's be honest here. It's obvious to everyone this shed is too big and has too many toys.
BASTARD! |
That's first class Gav, flash !
Chris & Melissa |
I should probably point out that I run my contracting business from this shed too.
The mill and lathe will get far more car oriented jobs done than electrical jobs though! |
Argh tax deduction!! Gold.
|
Sweet setup !
|
With a higher roof and some of these you could really store your toys: BendPak PL-14000 Triple Stacker Car Lift | Canada's Source For Auto Lifts
|
Hi all,
I've made some further progress with the workshop. There comes a time when a fella needs some of the creature comforts of home in his shed so I have fitted a kitchenette and a dunny. http://www.clubcobra.com/photopost/d...zeRender_3.jpg[/IMG] http://www.clubcobra.com/photopost/d...izeRender1.jpg[/IMG] For the sharp eyed ones among us, that is a dish washer under the bench with the fridge, it was surplus to a kitchen reno I did a while ago and it is a mean parts washer ;) I have now hung a flat screen TV on the wall too, I may never need to go home again.. |
Very nice Gav. Towel Rail and all. Wish I had room for one of those sheds.
|
Quote:
|
Gav,
Awesome shed. Pics of drip trays under the fancy vee dub not loading! Ben |
WOW. Digital lathe and mill. I m sooo jealous. Now..... make some chips !!
The Nut |
Gav,
Beudiful. Is that just Sisalation on the roof/walls or some paneling ? cheers Dave |
Its insulation Dave, 1/4" foam with foil both sides.
It is rated at R1.5, but more importantly it seals the workshop from dust. |
Quote:
|
This is a similar product
Tradeselect Thermalbrane 6 5 Foil Shed House Insulation 1350mm WD PER Lineal MTR | eBay It was installed in between the sheeting and the battens of the shed while it was being built, but it doesn't have to be. I just wanted to seal my workshop up, it gets VERY dusty here this time of year. It is reasonably rigid but not self supporting, they fix it into place with wide double sided tape normally. I would definitely fit it again if I was to build another shed. |
| All times are GMT -7. The time now is 08:46 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: