Another bloke needs another shed
 

Hi all,
Just thought I would start yet another workshop thread.

We sold our place just before Xmas and had purchased another block last year to build on, so given I have now just over 2 months left till moving day the pressure is on to get my new workshop built in time.

I am an electrical contractor and I work from home, so I need somewhere to store gear but more importantly need somewhere for my toys to live.

While it has served me very well over the past 12 years, I have found that I need more room.

http://www.clubcobra.com/photopost/d.../Gavs_Shed.jpg[/IMG]

The gable end that is to be clad in stone and the two doors on the return side will be all that is seen when you drive in the driveway, so kind of disguising the length of the shed. I have a couple of boats that will go in those two bays, reversing them straight back in will save me having to allocate room on the block to manoeuvre them around.
The other walls are to be clad in 'M' panel that is colourbond steel, pressed to look like weather boards and is hung horizontally on the walls. We have a garage and a shed where we are now clad in the same stuff and it looks great.

I also wanted a 'clean' and 'dirty' workshop space in the new shed, the clean being a room for building up work stuff along with the odd engine, it will be sealed and air conditioned (we get loads of dust up here and it gets into everything, I hate it) and the dirty workshop will be for metal work, grinding and other stuff that doesn't matter if it gets dusty.

I am having the whole thing insulated with aluminised foam sheet like Boxy has had in his new shop and will be fitting an evaporative air con to keep things comfortable in the main shed space during the hotter times of the year.

My planning permission and build permit are to be granted any day now and ground works are to commence in the next week or so, exiting times!!!

Gav

Well make sure that new engine build area is large enough, you know how you go through them. :LOL::D:LOL:

I hope to have mine back together this week, I'm not keen on moving the chariot in bits :0

Mate that's an impressive size! What size block is it going onto?

I hate you Gav :-) (Jealous really - nice garage-mahal) cheers Gregg

We are downsizing to 1 acre.
I am quite looking forward to it, I am a slave to what we have now!!

There has been a mile stone reached today.
After a couple of delays with the concrete, finally the frame was stood today, YAY!!

http://www.clubcobra.com/photopost/d...m/SHED_1_2.jpg

http://www.clubcobra.com/photopost/d...m/SHED_3_2.jpg

http://www.clubcobra.com/photopost/d...m/SHED_2_2.jpg

Good stuff Gav, love that L shape idea - 2 separate parking areas with workshop between.

Not big enough Gav...........no aircraft access as I see it.

Cheers
Chris & Melissa

Only the table end and the two roller doors on the 'L' end face the road.
I can easily reverse the trailers in from the road without having to allow extra turning space on my block.
I'm going to need a taller ladder to wire the lights thoug!!!

Hi mate ,im an aussie in the phillipinnes and i have found a 427 cobra that looks like it hasnt moved for about 30 years ,im trying to find out if it is genuine ? im going today to try and find the owner does a genuine car start with csx chassis number ? i live on the gold coast and im only here in town for another 10 hours if you could get back to me thanks m8.

Shed builds.... setting the foundation for dreams of spending lottos winnings.

Looks awesome and I am envious.

Gav

Looking good! My shed is just over 4m at its peak and I knocked up a platform for the top of the ute so I could stand on it and run the cable for the lights. Much easier than even my tallest a-frame ladder. The only challenge was clearing the floor to get the car in.

Geof

Gav great thread. Love the build. Excuse my ignorance but why so dusty?? I thought you'd moved next to Boxhead but not enough valiants in the adjoining yards!

It's been a while since I have had an update on the workshop.
Life and love has been getting in the way of a shed report so here is where I am at.

http://www.clubcobra.com/photopost/d...d_may_15_1.jpg

http://www.clubcobra.com/photopost/d...hed_may_15.jpg

I am now all moved in. But unfortunately not completely organised as yet.

My beautiful wife bought me some toys recently so the 'dirty' portion of the workshop is now pretty much complete and organised.
http://www.clubcobra.com/photopost/d...d_may_15_6.jpg

http://www.clubcobra.com/photopost/d...d_may_15_7.jpg

http://www.clubcobra.com/photopost/d...d_may_15_8.jpg

I now will start on the 'clean' workshop that will have a mezz floor above and toilet/wash station.
The hoist will probably go back together soon too.
I drove the cobra for the first time in ages the other day and are pleased to report it is still off its head and loves melting tires.

Love it.....very jealous.....I spend ages looking at he Hafco cat....I got a list of about 15k worth...English wheels to Mills.....Keep the pics coming and well done.

I spent 17K very quickly :O

Nice work Gav. Looks really good.

Hare and Forbes is a very dangerous shop. I reckon I've probably spent about $25K in there over the years.

Cheers

Gav,can your beautiful wife ring my beautiful wife pleeeeeeeeeease!

Love the shed. Keep the pics coming.

Matt