bits n' Pieces to move
Some billet suspension arms. ( Can supply drawings / info )
http://www.clubcobra.com/photopost/d...241015_015.jpg PM me if any interest. Muz |
Those billet arms could just hang on the wall as art, never get tired of looking at billet.
|
A bit more info on billet suspension arms. I had these arms made to take advantage of positive offset Corvette wheels that I was intending to run on my "Pace" car. Note that the hub is moved closer to center line of wheel. I have also introduced "Modified" Ackerman steering geometry and changed progression by moving steering rack toward axle centre. ( see sketches )
The main object of this setup is smoother cornering with less understeer and to do away with static toe out - which can make the car unstable. http://www.clubcobra.com/photopost/d...arms_mod-1.png http://www.clubcobra.com/photopost/d...e_wheels-1.png http://www.clubcobra.com/photopost/d...wheels_1-1.png http://www.clubcobra.com/photopost/d...450_x_600_.jpg http://www.clubcobra.com/photopost/d...00_x_450_1.jpg |
Some one with a Pace should jump on those arms quick smart. Sounds like the trick track day setup to me.
Cheers |
Note.....Stainless overriders have been sold. Muz
|
Quote:
|
Quote:
|
Quote:
|
I still have some of my Pace bits on the shelf. Details of components can be found earlier in this post.....will look at any offers - sensible or otherwise !!
http://www.clubcobra.com/photopost/d.../IMG_04261.jpg longer heavier push rods and joints to rear and steering adapters http://www.clubcobra.com/photopost/d.../IMG_04253.jpg revised toe link and steering brackets. http://www.clubcobra.com/photopost/d.../IMG_04231.jpg http://www.clubcobra.com/photopost/d...0_x_1275_1.jpg http://www.clubcobra.com/photopost/d...m/IMG_0424.jpg http://www.clubcobra.com/photopost/d...00_x_1425_.jpg |
Leroy - it's not too late. Sweet talk Muz into paying you a visit to front-half the Arntz chassis and retrofit some billet loveliness...
|
Stop it !
Seriously though, it's worth thinking about. But these really should have been snapped up by someone with a pace as a cool alternative to run different wheels and change a whole look and set up. Stop side trackin me, I am slowly on course and things like this is like doing a u-turn with an aircraft carrier. |
Just about ready to give away my custom "Pace" suspension arms
http://www.clubcobra.com/photopost/d...00_x_1425_.jpg Arms owe me $2200.00 alone !! 6061 billet arms, push rods, rod ends, steering adapters, toe arms etc |
PM sent Muzz,
might be a good alternative for my new GT40 suspensions. Interested mate. Cheers |
Quote:
|
springs still available.. whats the static height and load rates..?
|
Quote:
|
I have a similar spring collection if someone is looking for cheapies
|
Have you got any keeper springs Dave?
I started on the coupe yesterday assembling upper arms and coil overs and I will need some keeper springs to stop the main spring from bailing out if I am to get it to sit as low as I want to. |
Sorry Gav no keepers...
|
You are not a keeper either then
|
All times are GMT -7. The time now is 10:52 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: