Lemans Hardtop Install

[gjkrv8]

Originally Posted by Tenrocca

Ben is taking class 8 far too seriously and should leave it to us mere mortals Greggy, get some rspecs and have a real go at king cobra. Just saying.....

Says the man who has a new aero hardtop and cam :-)

I think I'll have to lodge a protest on the aero kit :-) Definitely a 5 second advantage :-)

[Tenrocca]

Originally Posted by gjkrv8

Says the man who has a new aero hardtop and cam :-)

I think I'll have to lodge a protest on the aero kit :-) Definitely a 5 second advantage :-)

Nah mate, the cams a baby. 214/220 .559 .565. Should be good for around 40kw\50nm
Anything would be better than the stock L76 Cam: 200/208......0.472/0.479. Those lobes are barely out of round.

As for the top, I may run it, I may not. I might actually take it off and on and see if it actually makes any difference to times.

[guye]

Originally Posted by Tenrocca

Speaking of rocket surgery, This engine work is a piece of piss - nearly done after tonights effort. Im thinking of opening a workshop with Mark Nieb....

Originally Posted by Tenrocca

Nah mate, the cams a baby. 214/220 .559 .565. Should be good for around 40kw\50nm
Anything would be better than the stock L76 Cam: 200/208......0.472/0.479. Those lobes are barely out of round.

So, I'm running the stock L77 setup that I presume is the same as the L76. I'll order the one you've spec'd and bring it up to the Nats. Can you get there Thursday arvo Andy? I'll help you change it over for me no probs. Should only take you, what, 3 hours and a six pack?