Classic Revival square tube body removal ?

e-clip · #1 (**permalink**) 09-28-2018, 08:52 PM

Hi Guys
Just wanted to remove the body from my Classic revival square tube Chassis (came fitted) Can anyone explain what the best way is to go about it ?

And the best way to store the body once off any weak points ? is on a flat surface fine or on saw horses ?

Thanks
Michael

Gav · #2 (**permalink**) 09-29-2018, 07:49 AM

Undo to the bolts and lift it off!
Nose up and lift it towards the back.
It should sit on a flat floor with no issues.

Tenrocca · #3 (**permalink**) 09-30-2018, 08:12 PM

I think you have to lift the rear and slide it forward Gav. I know you tried to remove it sliding it backwards in the winton carpark.

Gav · #4 (**permalink**) 10-01-2018, 07:04 PM

Double up

Gav · #5 (**permalink**) 10-01-2018, 07:06 PM

You are right on one point there Dave 😉
I forgot to undo the bolts at Winton...
The back does come up and it goes forward because of the bar between the two front openings.