|
Pedal Boxes and Emissions
Ok.
Back AGAIN! A simple one to start with... Does the RMC kit start with the pedal box assembled? Those with a Holden RMC kit, what did you require from the donor? I'm hoping to keep the 3.08 ratio in the diff cause I do some highway k's and hate to over rev! But what else? Does the diff just need a freshen up? Or does it need shortening? Those with the Jag version, any of ya's have the Ford rear end? I might be able to get a IRS rear end easy enough.... What work is envolved? Anyone here heard/done one? AND... According to the way I read the current regs LPG is possible. A CAT conv. has to be ran as per the standard emissions laws, otherwise seems ok.??.?.? Can I get an old 351, gas it, fit a CAT with the nessesary engine stuff like no smoke, hardened seats, and pass? Anyone have any idea?? Before I ask the engineer? What hoops are the cars tested on before rego? I assume a gas gun is run up the back and a sound test done?? Cheers Nathan |
Re: your gas question.
I only just snuck through in 1999 with my gassed Clevo before the regs got changed in Victoria in regards to the age of a motor. Contact Vic road for a copy of the Current ADRs (Australian Design Rules) |
sevenohms.. aren't you referring to the BRB kit?. It comes either GM (torana) or Jag rear end for the 2000 series.
Far as I know, the RMC only comes as a jag rear kit. |
| All times are GMT -7. The time now is 07:07 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: