Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Side indicators (http://www.clubcobra.com/forums/australian-cobra-club/52174-side-indicators.html)

Stuart 03-30-2004 04:06 AM

Side indicators
 
Does anyone have a suggestions on what they think looks ok when it comes to side indicators and placement.

I have purchased a couple of different types VY Comm and Mazda MX-5 but it is hard to determine what would look ok or unnoticable.

Any suggestions

Thanks
Stuart

Shelby400 03-30-2004 04:35 AM

I used side indicators from a Magna. Not too large and suit the car lines well.

REPTYL 03-30-2004 04:41 AM

I personally like the tear drop shapes.
Magna is a good choice.
Also depends on the car colour.
I went with clear Fairlane indicators (bit bigger than the Magna.)

REPTYL 03-30-2004 04:43 AM

Also remember that there is an ADR regarding the hieght from the ground to the indicator.:)

Cobra.au 03-30-2004 04:44 AM

I made a couple of brackets to mount the blinkers on the side vents to get threw rego then have taken them back off to keep it looking authentic just a thought if you dont want to drill holes in your guard.

Craig W:D

Stuart 03-30-2004 04:53 AM

Quote:

Originally posted by Cobra.au


I made a couple of brackets to mount the blinkers on the side vents to get threw rego then have taken them back off to keep it looking authentic just a thought if you dont want to drill holes in your guard.

Craig W:D

Craig
That idea appeals to me I wish I had thought of that before I had already drilled a hole in the drivers side guard.

The car is going to be Black and the painter has already warned me about trying to fill holes in f/glass.

Thanks
Stuart

REPTYL 03-30-2004 04:56 AM

1 Attachment(s)
Couldn't resist a photo opportunity.
Went with the clear indicators on the front also. (changed these after reg.):)

justbetter 03-30-2004 02:43 PM

Me too
 
1 Attachment(s)
One for the holden Gemini...:JEKYLHYDE

pneall 03-30-2004 04:20 PM

I used side indicators off a Ferrari. about 25mm in diameter, amber coloured and about $40.00 each. Mike M has photo and he will post shortly.

Regards,

Phil

AC514 03-30-2004 06:36 PM

Hi Stuart
Spoke to Engineer the other day about this.
He told me the indicators have to be minimum 350mm
from the ground and 1/3 thrd the length of the car.
Meaning that the indicator placement . Eg.If car is three
metre's long, Indicators have to be one metre back from the front
of car.

Hope this helps
Gino

cameron02 03-30-2004 09:47 PM

I'm using the round hella lights, they are ADR approved and pretty cheap. I like round lights as I think they look more old fashioned.

I thought the smaller the better. The best ones I have seen are small and round with a chrome ring around them. They are available from Europaspares, unfortunately they are about $130 each.

ac andy 03-31-2004 03:50 AM

VT commodore ones are available in orange or clear and are only about $30.00. (or cheaper if you work out how to flick them out of the side of a car!!!!!.............so i have been told!).

Andy.

Adrian S 04-16-2004 03:33 AM

Sorry to drag this thread to the top again. I lost my CC cookie file with my password in it a few weeks back and only just found it again.

Anyway, does anyone know the model or year Magna that have the side indicators talked about here ?

Ta moochly,
Adrian.

Adrian S 04-16-2004 03:47 AM

Oh, and where's the best place to get them in Melb (secondhand or otherwise) ?

Shelby400 04-16-2004 04:44 AM

From memory they came off a TA model Magna. I bought mine new for $14.00 each from Mitsubishi.

boxhead 04-16-2004 06:39 AM

If you can get a model that they came off I can get you a price on new ones, (I work in a large dealership & Mitsubishi is one of our models we sell)

Adrian S 04-18-2004 09:49 PM

Thanks Shelby400 & Boxhead,

I went down to the Mitsu. dealer on Saturday to suss them out. The Magna ones were $12.70 each which I got a pair of. On my way out of the shop I passed the car yard and noticed the exact same light but in clear plastic on a 2003 Lancer. So I went back in and did a swap since I reckon the clear looks better even though it's not authentic looking.

Thanks for the offer Boxhead, but for the low price it's probably not worth the effort of troubling you.

Previously I had the Hella round-but-square amber jobbies. Was never totally happy with the look but at least they got me through Rego. Looks like I'll have to cut a bigger hole now - better this than the other way round.

Thanks for your help guys. I'll post a pic of the clear Lancer lights in a day or two.

Cheers,
Adrian.


All times are GMT -7. The time now is 06:57 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: