Club Cobra
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   New to this... (http://www.clubcobra.com/forums/australian-cobra-club/52292-new.html)

Lynmac 04-06-2004 08:37 AM
Hmm sorry all

It appears that my link to the DOTAR site is not working.

I'll try again:
http://www.dotars.gov.au/transreg/vs...od_Manual.aspx

Hey Bernie......

Hope to catch up with you this Thursday


Regards
Lyn & Peter

boxhead 04-07-2004 04:49 AM
Thanks for both links there Lyn, I have just added em both to my Cobra related favorites list.

BMK 04-07-2004 06:36 AM
Lyn Peter

OK should be free after lunch Thursday. Sorry have a busy few hours first off tomorrow.

Will chase you up at the park.. Just listen for the Cobra.

Cheers

Bernie

Stuart 04-23-2004 03:04 AM
Quote:
Originally posted by Aussie Mike


I hadn't heard this but it's excellent news!!

The Street Rod Federation is much better represented than the Kit Car builders and have a better chance than we do of pushing this stuff through. Perhaps we need to start getting the Cobra clubs together and present a case to the authorities with what the Street Rodders have achieved as an example. We should also be talking to the Street Rod guys to work out an approach that might have a chance of getting through.

I don't think we need to ask for the same rules as the street rod guys but relaxing the requirement for a euro 3 spec engine would keep us afloat. If Cobras could still be built using the Ford EFI 5.0 or similar that's plentiful in wreckers around the country that would be enough to keep our hobby alive.

Where do we go from here? I might have to drop a mail to Mr O'Toole and ask his advice. Ted Robinette (the Guy that writes the tech section for Street Rodding) bought my old milling machine, I might have to drop him a line too.

Mike,

I was talking to Rob from G-Force Sportscars in WA and he was very interested in this topic and what the guys from this forum had to say.

He would like to get in touch with you and discuss this issue further.

So if your interested let me know and I will pass on your details to him.

Thanks
Stuart


All times are GMT -7. The time now is 09:16 AM.
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: