oil filters
Hi all,
I just put the engine in again and went to fit oil filter !!!!! don't fit, to big ,tried a smaller one still to big, so can anyone help. I need a filter to fit the 5lt 3/4bsp thread I think but needs to be no longer than 70mm the ones I have tried are z9, z170 I hope someone can help or I will have to cutup the chassis again to find room. Chris |
Chris:
Use a remote filter setup. Bob |
Remote oil filter
Go to Amsoil.com
Here's the link to bypass filter installation with photos. http://www.amsoil.com/products/bf.html You can get a bypass filter combined with a full-flow filter and the hardware to install it from them. There are lots of opinions about what oil to use, so I won't go into that but the Amsoil filters are high quality, as is the remote setup they sell. Paul |
Hi Chris
Ryco make a filter Z89A which might fit.I think the remote is the way to go. |
Thanks guys,
I had thought about a remote filter but was hoping for a easy fix but doesn't look like there is one so I will have set up a remote, more time!!!!! Chris.:mad: |
ah the joys
isnt it great when it all looks like its going to fit and like eveything nothing does .......:3DSMILE:
cobra when just about everything doesnt fit:LOL: :LOL: :LOL: |
Hey Chris....Wait till pete (PCC) answers ya...he's got one of them DRB 2000 thingys. ;)
He'll give ya an idea wots on his. :cool: Cheers |
Z9 and it fits with room to spare.
My engine is an NC Fairlane so may be different to your's Chris Sorry:( |
Thanks again,
Pete my engine is out of a xr8 but I have have the new chassis which was made to suit the boss engine there is a chassis support in the way. Thanks Les for passing the thread on. Thanks Jason just like a real King. Remote is underway. Chris. |
Easy out
I think its far easier to get at with remotes
%/ Chris the remote is the way to go, I think as it allows you the option of running a traditional setup for oil coolers at the front. I used the remote myself and will update the oil lines to the braided that I have had stored. Cheers Bernie |
The standard filter for some 302's is the FL-1 but it's too long for my Aurora Cobra. Used NAPA 1068.
John |
Chris
Myself and AC514 have a ford motorsport filter adapter which turns the filter 90 degrees to the eng block, we also had the same problem as yourself . Im sure Gino purchased it from ford racing performance parts distributor,RACEPARTS AUSTRALIA in queensland ph 07 3807 6870. If it doesn,t rain i will bring the car to the mercat thursday It fits as easily as an oil filter. |
All times are GMT -7. The time now is 06:58 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: