|
delay for warning lights
:confused:
gday boys i was wondering what you guys have used in the way of a bulb check function and time delay for the seat belt light and low brake fluid light i was thinking of using the alt circuit light but it does not stay on long enough i have heard of a delay relay which by sounds of things will be nice and compact any thoughts will be greatly appreciated cheers jess |
I wired my seatbelt light to my handbrake light
|
i got a time delay from a electronics shop up here on the suny coast , comes on for 15 seconds when ignition is turned on . cost about $30 .
i found out i had to have it just before redg and luckily had a spare light on dash , got out the label maker "seatbelt warning light" then tore the $%&er off when i drove out of main roads (rta) |
dbn04
Got any photo`s of your car that you can post? How did you go with rego - any drama`s Regards Nick |
Hi DNB04, Got any more details on that delay circuit? I'm wiring my dash at the moment and wouldn't mind incorporating one.
Cheers Michael |
i cant find receipt for it , but the place i got it is not far from work i will drop in tomorrow and see how much and let you know , as for redgo i did all what the engineer said to do and it went thru no probs , i had a mirror mounted to dash that he said would not get thru , but i was not going to mount a breakaway to windscreen and take off and possilbly break screen after (dont like them on screen ) and main roads did not say sh%T, same as reversing lights reflectors, took them off after redg, i have been driving for 18 months and never been done for any of the above , oh and my rear licence plate is under rear bar and no one has said sh$t also ,
darren |
stuck some pics in the gallery (not sure how to put on a post) oh and i was known as cobra no go before the crash (cc site crash) but it does go now so changed name , no offence intended,ps: I WISH I KNEW OF THE SITE BEFORE I STARTED OR DURING MY BUILD IT WOULD HAVE SAVED ME A LOT OF TIME AND MONEY.for all you guys starting here is the place to ask.
darren |
Seat belt warning light.
I used a build yourself kit from Jaycar electronics. It was not real complicated but took a bit of fiddling.
The kit is an "interior light Delay" for cars. The kit number is KC5392 and it costs $18.95. You can order online from Jaycar. I cannot remenber exactly but I used the starter position on the ignition to trigger the delayed switching off. I think you trick the unit into thinking the lights were turned off. For some reason that I cannot remember, I used a relay to help confuse the circuit. Good luck, I know it took me about 3 nights to get it right. Phil |
justwent and checked the switch out , and i gotta say the new version is a pisser! about 1 cm round and 2 cm long ,light and delay switch incorparated in one unit even has the little bloke with his belt on . $27.50 plus gst . he has one in stock at the moment but said does not take long to knock em up . only 2 wires to connect.stays on 15 seconds.
there details are . electronic&electrical solutions 0754534355 email e.e.solutions@bigpond.com.au |
Champ! thanks for that.
Cheers |
G'day,
Luckily the factory seats I bought have provision for a seat belt circuit already on the driver's seat. So as soon as you do buckle up the light will go off. |
Hyundi have a delay black box thingy my mate who is an auto electrican got one for me.
sorry for the description Craig W |
hey guys thanks for that
|
| All times are GMT -7. The time now is 08:45 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: