|
After an unfinished Cobra chassis that was started as a project but never fininshed.
I'm after a unfinished Cobra Chassis that someone has started and never finished because they either got bored with the project or just realise they don't have the time. I have the figreglass shell of a cobra at home and are trying to hunt down an unfinished chassis so I can begin my project. It does'nt matter if its not designed for our shell, my fater and i can pretty much moddify anything to fit. I would have already had a Chassis that my cousin payed $14,000 to be started but Robnell went into liquidation and that money was blown and the Chassis was never started as far as we have been able to find out..
So if anyone has or knows of a Chassis lying around, please let me know. I live in country Victoria and don't mind having to travel to track one down Thanks for you time. Nathan |
http://cgi.ebay.com.au/Cobra-Replica...QQcmdZViewItem
This car on ebay may be worth having a look at. Brett |
Contact Matry at.
Kenmer Engineering Pty Ltd 5 Tower Ct, Noble Park, VIC 3174 - (03) 9701 6037 Has a couple good strong chassies fabricated and engineered and ready to go. |
are the guys at Essendon still doing the cars or are they out of it?
I've also tried to buy parts. PS: don't touch the Toyota crown stuff, they will never get registered here in Vic, and on the body they have a manger fault on the rear of the l/hand tail light, it's out by about 2" to 2-1/2". the cars were built by auto styling in the early eighties. they do get past in WA, try the trading post, eBay or give some of the kit builders a ring to see if someone has pulled the pin on there project, they might offload it cheep. it's amazing how many people looz interest or get scared when it gets to a roller $$. |
You can also still get crown based Cobra's registered in QLD.
Unless you are particularly found of the body you have, you might be better off selling it and buying a complete body/chassis unit. Probably work out to be slightly more expensive, but you will be building a brand kit which will be much easier to sell. Plus it will save you a lot of work & possibly some heartache. Other than that, I'm guessing some of the manufacturers will sell chassis units separately. |
Laurie Bongailas, RCM, will sell a chassis separately. It's very strong and uses Jag suspension. Last I heard he sold a chassis for about $3000. He's based in Blackburn, Melbourne. If you're interested in contacting him I'll PM you his details.
|
| All times are GMT -7. The time now is 02:23 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: