Club Cobra
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   Australian Cobra Club (http://www.clubcobra.com/forums/australian-cobra-club/)
-   -   Boot Progress (http://www.clubcobra.com/forums/australian-cobra-club/79246-boot-progress.html)

jess 05-28-2007 07:57 AM
Nice work guys,

you couldn't pay someone to that

Gav 05-28-2007 04:26 PM
Lovely work guys, I'm quite jealous.

Makes mine look VERY basic and I'm not happy about it!!!

I agree with you Mike the tail lights do need a cover, I need one, due to the tail lights I'm using being open in the back with the lamp exposed. Although it could be handy if you want a boot light, hit the brakes and presto!

Gav

Tenrocca 05-28-2007 04:31 PM
Quote:
Originally Posted by Aussie Mike

Your folder looks like a handy tool as well. I might have to look at making one of them. You cant have too many tools.

Cheers
I put the plans in my gallery for anyone interested.

Quote:
Originally Posted by Chrome

Nice work but enough for now....we cant have any more ideas flying around, its over, it has to be over! lol

Cheers
......trying to make up for lack of MOTOR-vation :)

Gav 05-28-2007 05:25 PM
I see your wheels have arrived. I like the knock offs, are those the Shelby series wheels?
Great work Andrew, thanks for the bender spec's I will be needing one NOW.

Tenrocca 05-28-2007 05:34 PM
Quote:
Originally Posted by Gav
I see your wheels have arrived. I like the knock offs, are those the Shelby series wheels?
Great work Andrew, thanks for the bender spec's I will be needing one NOW.
No Gav - they are my "period correct" American Racing Torque Thrust II's :D :D . Vintage series from American racing (like your Salt flats), but I think the only other style they made with the right offsets.

Rob. Smith 06-01-2007 07:34 AM
Quote:
Originally Posted by Tenrocca
Thanks Ben - I made a bending brake a while back from some plans I found on the net:

http://www.clubcobra.com/photopost/d...G_6769_5_1.JPG

It does an OK job on 1.2mm aluminium but I wouldnt want to go much thicker. The large curve I just bent around a fence post till it was about right! I made up lots of cardboard templates first though.
The engine bay is next.
Yess! the cardboard template. Mine are all out of beer carton ( you have to empty them first) I almost have a complete Cobra made of cardboard !


All times are GMT -7. The time now is 06:04 PM.
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: