Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   B & B Cobra's --- Speak with Bryan Anderson (http://www.clubcobra.com/forums/b-b-cobras-speak-bryan-anderson/)
-   -   Wheel and tire question (http://www.clubcobra.com/forums/b-b-cobras-speak-bryan-anderson/114724-wheel-tire-question.html)

Phansm72 03-10-2012 01:46 PM

Wheel and tire question
 
I have my rear end and rear wheels and tires taken care of. Looking to get the Team 3 AC III wheels to match for the front. Im using a set of the 5/8 narrowed tubular mustang 2 front upper and lower control arms with a set of the 11 inch brakes and rotors. What backspace and width should I use in the front as well as tire size. The team 3 guy I spoke to said 7" rim with 4.5 backspace, that sound right? I dont want the rim too far in and Id like to run a 8 in the front if possible. Also what tire size for the front.

I have these ACIII s for the rear 15x10 for my narrowed 8.8

http://sphotos.xx.fbcdn.net/hphotos-...38232913_n.jpg

Phansm72 03-11-2012 05:20 PM

It is a B+B cobra , made in 2001

lnfletcher 03-12-2012 05:14 AM

I am running 4.5 back spacing both front and rear. The difference is that I have the tubular front and 9" narrowed rear. If you need, I can measure from the mounting face to the frame on both the front and rear and give you an idea if they are the same.

Phansm72 03-12-2012 10:45 AM

Quote:

Originally Posted by lnfletcher (Post 1180532)
I am running 4.5 back spacing both front and rear. The difference is that I have the tubular front and 9" narrowed rear. If you need, I can measure from the mounting face to the frame on both the front and rear and give you an idea if they are the same.

That would be cool! Thanks!

lnfletcher 03-13-2012 12:11 PM

Ok, here's the measurements from mine.
I am running 15 X 7 and 4.5 backspace with 235/60/15 on front.
Also running 15 X 8 and 4.5 backspace with 295/50/15 on rears.

From frame to face on front is 12 7/8" and 7 3/8" on rear.

The rear is slightly tucked in on mine so it could come out a little. If you are running 10" on the rear, yours will most likely stick out a little.
I had a rub on my drivers side that I had to fix so you don't want to go farther in.

http://www.clubcobra.com/photopost/d...mbs/Rear17.JPG

http://www.clubcobra.com/photopost/d...bs/Front24.JPG

http://www.clubcobra.com/photopost/d...ont_Method.JPG

http://www.clubcobra.com/photopost/d...Front_Meas.JPG

http://www.clubcobra.com/photopost/d...ear_Method.JPG

http://www.clubcobra.com/photopost/d.../Rear_Meas.JPG

Phansm72 03-13-2012 06:49 PM

Wow thank you so much for doing that for me, muchly appeciated!!!


All times are GMT -7. The time now is 08:23 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: