- -
B&B anti-sway bars
(
http://www.clubcobra.com/forums/b-b-cobras-speak-bryan-anderson/78006-b-b-anti-sway-bars.html)
| stevem |
04-09-2007 11:18 AM |
B&B anti-sway bars
I am looking to add front and rear sway bars. Does anyone know of a good vendor or donor car? What would be the bar size and width needed? Does anyone have installation pictures? Any help appreciated.
|
| Clois Harlan |
04-09-2007 11:30 AM |
I had mine made by a company in Oregon and I used a 1" bar. I think if I had it to do again I would go to an adjustable type sway bar that are sold at most of the local speed shops with splined ends. Here is a post I made some time ago when I bought mine:
http://www.clubcobra.com/forums/show...front+sway+bar
|
| stevem |
04-09-2007 07:19 PM |
Thanks, The old posts have a lot of great info. Do you run a rear bar? Also have you replaced any of the rear trac bars with poly bushings?
|
| MacGyver |
04-09-2007 08:32 PM |
I too have the same questions. How about the B&B front sway bar? I have heard any fox 5.0 configuration rear bar will work. Can anyone verify this?
|
| Clois Harlan |
04-10-2007 06:57 AM |
I tried a rear bar but I didn't like the feel so I took it off. I also replace all my bushings in my rear trailing arms with the poly bushings EXCEPT the UPPER control arms that mount to the pumpkin, I kept the butyl rubber ones in there for their ability to flex a little more. Leaving those top ones in seemed to help with handling and ride comfort when not on a track.
Clois
|
| Dusty Rhodes |
04-10-2007 09:29 PM |
I used a front swaybar from an 86 camaro. works great. picture of it in my photo gallery.
|
| All times are GMT -7. The time now is 05:21 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: